Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1H,1H,2H-Perfluorohex-1-ene > 1H,1H,2H-Perfluorohex-1-ene(19430-93-4)

1H,1H,2H-Perfluorohex-1-ene(19430-93-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

1H,1H,2H-Perfluorohex-1-ene

Synonyms

(Perfluorobutyl)ethene
1H,1H,2H-Nonafluoro-1-hexene
3,3,4,4,5,5,6,6,6-Nonafluorohex-1-ene
3,3,4,4,5,5,6,6-Nonafluoro-1-hexene
Perfluorobutylethylene
Zonyl PFBE

CAS

19430-93-4

Formula

C6H3F9

Molecular Weight

246.07

EINECS

243-053-7

RTECS

MP7360000

RTECS Class

Other

Beilstein/Gmelin

1819716

More
Less

Physical and Chemical Properties

Appearance

Colorless liquid.

Solubility in water

Insoluble

Boiling Point

59-60

Density

1.41 g/cm3

Vapor Density

8.5

Refractive Index

1.29 (20 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid. Wash mouth out with water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Wash clothing before reuse. Remove all contaminated clothing immediately.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Keep containers tightly closed.

Handling

Wash thoroughly after handling. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause irritation of the digestive tract.

Inhalation

Causes respiratory tract irritation. Vapors may cause dizziness or suffocation.

Skin

Causes skin irritation.

Eyes

Causes eye irritation.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 11

EC Safety Phrase

S 16 23 29 33

UN (DOT)

1993

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

More
Less

Fire Fighting Measures

Flash Point

-17

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

More
Less

Stability and Reactivity

Stability

No data.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

More
Less

ContactMore

Fuxin Ruifeng Fluorine Chemicals Co.,Ltd
Tel
13941692605;
WebSite
http://www.fxrf.com.cn
Weihai Zhaochuan Biotechnology Co., Ltd.
Fax
0631-5295078
WebSite
https://www.chemicalbook.com/Supplier/15304340/1.htm
Shangfluoro
Tel
021-65170832
WebSite
http://www.flonclean.com
Jinan Guochen Taifu Chemical Co., Ltd
Tel
0531-88162029
Fax
0531-88162019
WebSite
http://www.jngctf.com/
J & K SCIENTIFIC LTD.
Tel
18210857532;
Fax
86-10-82849933
WebSite
https://www.jkchemical.com