Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 1,2,3,4-Tetrafluorobenzene > 1,2,3,4-Tetrafluorobenzene(551-62-2)

1,2,3,4-Tetrafluorobenzene(551-62-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

1,2,3,4-Tetrafluorobenzene

CAS

551-62-2

Formula

C6H2F4

Molecular Weight

150.07

EINECS

208-997-6

Beilstein/Gmelin

1910024

Beilstein Reference

4-05-00-00639

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Melting Point

-42

Boiling Point

95

Density

1.811 g/cm3

Vapor Density

5.17

Refractive Index

1.4054 (20 C)

More
Less

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Flammables-area. Keep containers tightly closed. Store in a cool, dry area away from incompatible substances.

Handling

Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Do not breathe vapors.

More
Less

Hazards Identification

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Ingestion of large amounts may cause CNS depression.

Inhalation

May cause respiratory tract irritation. Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause irritation of the mucous membranes. May cause burning sensation in the chest.

Skin

May cause irritation and dermatitis. May cause cyanosis of the extremities.

Eyes

May cause eye irritation. May cause chemical conjunctivitis.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

UN (DOT)

1993

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear chemical goggles. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

More
Less

Fire Fighting Measures

Flash Point

4

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. Use dry chemical, carbon dioxide, or alcohol-resistant foam. Do NOT use straight streams of water.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment. Cover with sand, dry lime or soda ash and place in a closed container for disposal. Remove all sources of ignition. Use a spark-proof tool. A vapor suppressing foam may be used to reduce vapors.

More
Less

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, carbon dioxide, hydrogen fluoride.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

More
Less

ContactMore

Shandong Carbon Spring New Materials Co., Ltd.
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList1760113/0_EN.htm
Shanghai Boyle Chemical Co., Ltd.
Tel
021-50182298 021-50180596
Fax
+86-21-57758967
WebSite
http://www.boylechem.com
J & K SCIENTIFIC LTD.
Tel
18210857532;
Fax
86-10-82849933
WebSite
https://www.jkchemical.com
INTATRADE GmbH
Tel
+49 3493/605464
Fax
+49 3493/605470
WebSite
http://www.intatrade.de/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn