Product Identification

Product Name

4-(4-Methoxyphenyl)-1-butanol

Synonyms

4-(4-Hydroxybutyl)anisole
4-(4-Methoxyphenyl)-1-butanol
4-(4-Methoxyphenyl)butan-1-ol
4-(4-Methoxyphenyl)butanol
4-(p-Methoxyphenyl)-1-butanol

CAS

52244-70-9

Formula

C11H16O2

Molecular Weight

180.25

EINECS

257-782-3

Physical and Chemical Properties

Solubility in water

1.2 g/L (25 C)

Melting Point

62

Boiling Point

305

Vapor Pressure

0.0004 (25 C)

Density

1.042 g/cm3 (25 C)

pKa/pKb

15.15 (pKa)

Partition Coefficient

2.32

Heat Of Vaporization

57.55 kJ/mol

Refractive Index

1.5267 (20^oC)

First Aid Measures

Ingestion

If swallowed, wash out mouth with water provided person is conscious. Call a physician.

Inhalation

If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.

Skin

In case of contact, immediately wash skin with soap and copious amounts of water. Remove contaminated clothing and shoes. Call a physician.

Eyes

In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.

Handling and Storage

Storage

Keep tightly closed.

Hazards Identification

Ingestion

May be harmful if swallowed.

Inhalation

Material may be irritating to mucous membranes and upper respiratory tract. May be harmful if inhaled.

Skin

May cause skin irritation. May be harmful if absorbed through the skin.

Eyes

May cause irritation

Hazards

Emits toxic fumes under fire conditions.

Exposure Controls/Personal Protection

Personal Protection

Compatible chemical-resistant gloves. Chemical safety goggles. Protective clothing.

Respirators

Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks.

Fire Fighting Measures

Flash Point

131

Fire Fighting

Extinguish with water spray, carbon dioxide, dry chemical powder or appropriate foam. Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

Accidental Release Measures

Small spills/leaks

Sweep up, place in a bag and hold for waste disposal. Avoid raising dust. Ventilate area and wash spill site after material pickup is complete.

Stability and Reactivity

Stability

Stable at normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Oxides of carbon.