Product Identification

Product Name

1-Bromo-2-vinylbenzene

Synonyms

2-Bromostyrene
2-Vinylphenyl bromide
Benzene, 1-bromo-2-ethenyl-
o-Bromostyrene

CAS

2039-88-5

Formula

C8H7Br

Molecular Weight

183.05

EINECS

218-027-3

Beilstein/Gmelin

2323537

Beilstein Reference

4-05-00-01349

EC Class

irritant

Physical and Chemical Properties

Appearance

Light yellow liquid.

Solubility in water

Insoluble

Melting Point

7

Boiling Point

210

Vapor Pressure

0.29 (25 C)

Density

1.409 g/cm3 (15 C)

Partition Coefficient

3.47

Heat Of Vaporization

42.8 kJ/mol

Vapor Density

6.3

Refractive Index

1.5927 (20 C)

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator (approx 4 C).

Handling

Wash thoroughly after handling. Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation

May cause respiratory tract irritation. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

May cause skin irritation. May cause cyanosis of the extremities.

Eyes

May cause eye irritation. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause central nervous system depression.

EC Risk Phrase

R 36/37/38

EC Safety Phrase

S 26 36

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Flash Point

85

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated. Runoff from fire control or dilution water may cause pollution. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Stability and Reactivity

Incompatibilities

Acids, bases, halogens.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide.

Transport Information

HS Code

2903 69 90