Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Ethanesulfonic acid > Ethanesulfonic acid(594-45-6)

Ethanesulfonic acid(594-45-6)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Ethanesulfonic acid

Synonyms

1-Ethanesulfonic acid
Ethylsulfonic acid

CAS

594-45-6

Formula

C2H6O3S

Molecular Weight

110.13

EINECS

209-843-0

Beilstein/Gmelin

1743071

Beilstein Reference

4-04-00-00033

EC Class

corrosive

More
Less

Physical and Chemical Properties

Appearance

Clear brown liquid.

Solubility in water

Very soluble

Melting Point

-17

Boiling Point

123 (1 torr)

Density

1.343 g/cm3

Partition Coefficient

-.37

Vapor Density

3.8

Refractive Index

1.4335 (20 C)

More
Less

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

More
Less

Handling and Storage

Storage

Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Handling

Use only in a well ventilated area. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes.

More
Less

Hazards Identification

Inhalation

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.

Skin

Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.

Eyes

Causes eye burns. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.

Hazards

Contact with metals may evolve flammable hydrogen gas.

EC Risk Phrase

R 34

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

1760

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

> 110

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.

Fire Potential

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

More
Less

Stability and Reactivity

Disposal Code

4

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, oxides of sulfur, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1760

Hazard Class

8

Packing Group

I; II; III

HS Code

2904 10 00

More
Less

ContactMore

Yancheng Yuntao Chemical Co., Ltd.
WebSite
http://www.yuntao-chem.com
MINKESH (SHANGHAI) CO., LTD.
Tel
+86-021-20980300
Fax
021-20983811
WebSite
http://www.minkesh.com
Yancheng Guohong Chemical Products Co., Ltd.
Tel
0515-70125098
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList31085/0_EN.htm
Shanghai Taijilin Industrial Co., Ltd.
Tel
021-50630626
Fax
021-50563898
WebSite
http://www.tajilin.com/
Shandong Qianyuan Polymer Material Co. , Ltd.
Tel
18678041314
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList1245847/0_EN.htm