Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > Diphenyl cresol phosphate > Diphenyl cresol phosphate(26444-49-5)

Diphenyl cresol phosphate(26444-49-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

Diphenyl cresol phosphate

Synonyms

Cresyl diphenyl phosphate
Kronitex CDP
Phosflex 112
Phosphoric acid, diphenyl tolyl ester

CAS

26444-49-5

Formula

C19H17O4P

Molecular Weight

340.33

EINECS

247-693-8

RTECS

TC5520000

RTECS Class

Other

Beilstein/Gmelin

NA

More
Less

Physical and Chemical Properties

Appearance

A clear transparent liquid with a very slight odor.

Melting Point

-37.8

Boiling Point

235

Density

1.20 g/cm3 (20 C)

Usage

Plasticizer, extreme-pressure lubricant, hydraulic fluids, gasoline additive, food packaging.

More
Less

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

More
Less

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Hazards Identification

Ingestion

Abdominal pain, nausea, and vomiting often occur. Diarrhea may last several weeks.

Inhalation

Early symptoms may involve transient gastrointestinal upset, nausea, vomiting, diarrhea, abdominal pain. Soreness of lower leg muscles, numbness of toes and fingers may follow in 1-3 weeks.

Skin

The soles of the feet and palms may be cold, cyanotic, and profusely diaphoretic.

Eyes

See inhalation

More
Less

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter.

Poison Class

3

More
Less

Fire Fighting Measures

Flash Point

232

Fire Fighting

Extinguish fire using agent suitable for type of surrounding fire. (Material itself does not burn or burns with difficulty.) Use water in flooding quantities as fog. Cool all affected containers with flooding quantities of water. Keep run-off water out of sewers and water sources.

Fire Potential

This chemical is combustible.

More
Less

Accidental Release Measures

Small spills/leaks

Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water. Water spill: Use natural barriers or oil spill control booms to limit spill travel.

More
Less

Stability and Reactivity

Incompatibilities

May react violently with magnesium.

Stability

Stable.

More
Less

ContactMore

Tianjin Zhongxin Chemtech Co., Ltd.
Tel
022-66880623
Fax
86(0)22-66880086
WebSite
http://www.tjzxchem.com
J & K SCIENTIFIC LTD.
Tel
18210857532;
Fax
86-10-82849933
WebSite
https://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006356688
Fax
86-21-61259102
WebSite
http://www.x-labseek.com/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/