N-Ethylmethallylamine(18328-90-0)
Product Identification
Product Name
N-Ethylmethallylamine
Synonyms
N-2-Methylallyl-N-ethylamine
N-Ethyl-2-methyl-2-propen-1-amine
N-Ethyl-2-methylallylamine
N-Ethyl-2-methylprop-2-en-1-amine
N-Ethylmethylallylamine
CAS
18328-90-0
Formula
C6H13N
Molecular Weight
99.2
EINECS
242-217-5
RTECS
UC6627500
RTECS Class
Other
Beilstein/Gmelin
1738092
Beilstein Reference
4-04-00-01104
First Aid Measures
Ingestion
Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.
Eyes
In case of contact with substance, immediately flush with running water for at least 20 minutes.
Handling and Storage
Storage
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards Identification
Ingestion
May cause toxic effects.
Inhalation
Vapors may cause dizziness or suffocation. May cause toxic effects.
Skin
Contact with substance may cause severe burns.
Eyes
See Skin.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
UN (DOT)
2733
Accidental Release Measures
Small spills/leaks
Make no contact with the spilled material. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.
ContactMore
- Tel
- 4006356688
- Fax
- 86-21-61259102
- WebSite
- http://www.x-labseek.com/
- Tel
- 010-88425576
- Fax
- (+86)-10-88425546
- WebSite
- http://www.dhltchem.com/
- Tel
- 010-60275820
- Fax
- 010-60270825
- WebSite
- http://www.dtfchem.com
- Tel
- 010-89508211
- Fax
- 010-89508210
- WebSite
- http://www.hwrkchemical.com
- Tel
- +86 (0) 571 85 58 67 18
- Fax
- 0086-571-85864795
- WebSite
- http://www.capotchem.com/