Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2,6-Dichlorotoluene > 2,6-Dichlorotoluene(118-69-4)

2,6-Dichlorotoluene(118-69-4)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

2,6-Dichlorotoluene

Synonyms

1,3-Dichloro-2-methyl benzene

CAS

118-69-4

Formula

C7H6Cl12

Molecular Weight

161.03

EINECS

204-269-7

Beilstein/Gmelin

1907194

Beilstein Reference

4-05-00-00815

More
Less

Physical and Chemical Properties

Appearance

Clear, colorless liquid.

Solubility in water

2.4 mg/100 ml

Melting Point

2

Boiling Point

200

Density

1.2686 g/cm3 (20 C)

Usage

Chemical intermediate for dyes, high boiling solvent.

Vapor Density

5.6

Refractive Index

1.5508 (20 C)

More
Less

First Aid Measures

Ingestion

Emesis is not indicated due to the irritant nature of these agents. Charcoal - not recommended; it may promote vomiting and make endoscopic evaluation difficult. Dilution: immediately dilute with 4 to 8 ounces (120 to 240 ml) of milk or water (not to exceed 4 ounces/120 ml in a child). Neutralization - neutralization is not indicated. Although these agents are irritants, and therefore should not produce tissue damage, it is almost impossible to assure that a particular substance under a particular set of circumstances would not cause damage. Therefore, each patient should be examined with the idea that mucous membrane damage might have occurred.

Inhalation

Move patient to fresh air. Monitor for respiratory distress. If cough or difficulty breathing develops, evaluate for respiratory tract irritation, bronchitis, or pneumonitis. Administer oxygen and assist ventilation as required. Treat bronchospasm with beta2 agonist and corticosteroid aerosols.

Skin

Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush with running water for at least 20 minutes. Wash skin with soap and water.

Eyes

Irrigate exposed eyes with copious amounts of tepid water for at least 15 minutes. If irritation, pain, swelling, lacrimation, or photophobia persist, the patient should be seen in a health care facility. If in a medical facility, sterile saline should be used to irrigate the eyes until the cul de sac is returned to neutrality. Some alkali exposures may require prolonged irrigation.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

More
Less

Hazards Identification

Ingestion

Nausea, vomiting and diarrhea are possible if ingested.

Inhalation

Cough, tachypnea, and wheezing are common after inhalation.

Skin

Redness, swelling and pain may occur.

Eyes

See Skin.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 51/53

EC Safety Phrase

S 24/25 61

UN (DOT)

2238

More
Less

Exposure Controls/Personal Protection

Personal Protection

Wear appropriate protective gloves, clothing and goggles.

Respirators

Wear positive pressure self-contained breathing apparatus (SCBA).

More
Less

Fire Fighting Measures

Flash Point

82

Autoignition

>600

Fire Fighting

If material on fire or involved in fire: Do not extinguish fire unless flow can be stopped or safely confined. Use water in flooding quantities as fog. Solid streams of water may spread fire. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use foam, dry chemical, or carbon dioxide.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Make no contact with the spilled material. ELIMINATE all ignition sources and ground all equipment. Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean non-sparking tools to collect absorbed material.

More
Less

Stability and Reactivity

Incompatibilities

Incompatible with strong oxidizing and reducing agents Incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire will produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

2238

Hazard Class

3

Packing Group

III

HS Code

2903 69 90

More
Less

ContactMore

Shanghai Kaisai Chemical Co., Ltd
Tel
021-33516722
Fax
021-33516776
WebSite
http://www.kaisaichem.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
4006356688
Fax
86-21-61259102
WebSite
http://www.x-labseek.com/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Ark Pharm, Inc.
Tel
847-367-3680
Fax
847-367-3681
WebSite
http://www.arkpharminc.com/