Product Identification

Product Name

SOD

Synonyms

Cuprein
Dismuzyme Plus
Orgotein
Palosein
Peroxide dismutase
Superphycodismutase

CAS

9054-89-1

EINECS

232-943-0

Beilstein/Gmelin

NA

First Aid Measures

Ingestion

Seek medical assistance.

Inhalation

Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.

Skin

Remove and isolate contaminated clothing and shoes. Remove material from skin immediately. Immediately flush with running water for at least 20 minutes.

Eyes

Immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion

See Skin.

Inhalation

Causes irritation.

Skin

May cause severe injury or burns.

Eyes

See Skin.

Hazards

May explode from heat, shock, friction or contamination. May ignite combustibles (wood, paper, oil, clothing, etc.).

UN (DOT)

9187

Exposure Controls/Personal Protection

Personal Protection

Wear appropriate protective gloves, clothing and goggles.

Respirators

Wear positive pressure self-contained breathing apparatus (SCBA).

Fire Fighting Measures

Fire Fighting

Small Fires: Water spray or fog is preferred; if water not available use dry chemical, carbon dioxide or regular foam. Large Fires: Flood fire area with water from a distance. Use water spray or fog; do not use straight streams.

Fire Potential

May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect.

Accidental Release Measures

Small spills/leaks

ELIMINATE all ignition sources and combustible materials. Do not touch spilled material unless wearing appropriate protective clothing. Keep substance wet using water spray. Stop leak if you can do it without risk. Take up with inert, damp, noncombustible material using clean non-sparking tools and place into loosely covered plastic containers for later disposal. For large spills, contact specialist for clean-up or disposal instructions.

Stability and Reactivity

Stability

No data.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Physical and Chemical Properties

Usage

Research probe for oxygen in biological and chemical reactions. Free radical scavenger.

Transport Information

UN Number

9187

Hazard Class

5.2