Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > N,N-Dimethylpyridin-2-amine > N,N-Dimethylpyridin-2-amine(5683-33-0)

N,N-Dimethylpyridin-2-amine(5683-33-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

N,N-Dimethylpyridin-2-amine

Synonyms

2-(Dimethylamino)pyridine
N,N-Dimethylpyridin-2-amine

CAS

5683-33-0

Formula

C7H10N2

Molecular Weight

122.17

EINECS

227-147-5

RTECS

US9200000

RTECS Class

Other

Beilstein/Gmelin

110353

Beilstein Reference

5-22-08-00287

EC Class

flammable, irritant

More
Less

Physical and Chemical Properties

Appearance

Clear colorless to pale yellow.

Solubility in water

Soluble

Boiling Point

191

Vapor Pressure

0.4 (25 C)

Density

1.0157 g/cm3 (14 C)

pKa/pKb

7.00 (pKa)

Partition Coefficient

1.41

Heat Of Vaporization

51.3 kJ/mol

Refractive Index

1.55545 (17.7 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Eyes

Flush with running water for at least 20 minutes.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Flammables-area.

Handling

Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

Vapors may cause dizziness or suffocation. May cause irritation or burns.

Skin

May cause irritation or burns.

Eyes

See Skin.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 10 20/21/22 36/38

EC Safety Phrase

S 26 36/37/39

UN (DOT)

1993

More
Less

Exposure Controls/Personal Protection

Personal Protection

Wear appropriate protective gloves, clothing and goggles.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

More
Less

Fire Fighting Measures

Flash Point

75

Autoignition

430

Fire Fighting

Use of water spray when fighting fire may be inefficient. Small Fires: Dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Large Fires: Water spray, fog or alcohol-resistant foam. Use water spray or fog; do not use straight streams.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.

More
Less

Stability and Reactivity

Disposal Code

5

Incompatibilities

Acids - oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

HS Code

2933 39 99

More
Less

ContactMore

J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Energy Chemical
Tel
021-021-58432009
Fax
021-58436166
WebSite
http://www.energy-chemical.com