Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate > 2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate(376-14-7)

2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate(376-14-7)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

2-(N-Ethylperfluorooctanesulfonamido)ethyl methacrylate

Synonyms

2-(Ethyl-(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-heptadecafluorooctylsulfonyl)amino)ethyl 2-methylprop-2-enoate
2-Propenoic acid, 2-methyl-, 2-[ethyl[(heptadecafluorooctyl)sulfonyl]amino]ethyl ester

CAS

376-14-7

Formula

C16H14F17NO4S

Molecular Weight

639.32000000000005

EINECS

206-805-5

Beilstein/Gmelin

NA

More
Less

Physical and Chemical Properties

Appearance

Solid.

Solubility in water

Insoluble

Melting Point

48-55

Boiling Point

379

Vapor Pressure

6E-6 (25 C)

Density

1.5 g/cm3

Partition Coefficient

10.72

Heat Of Vaporization

62.7 kJ/mol

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator (approx 4 C).

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.

More
Less

Hazards Identification

Ingestion

May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.

Inhalation

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

May cause skin irritation. May be absorbed through the skin.

Eyes

May cause eye irritation.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

More
Less

Fire Fighting Measures

Flash Point

183

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable under normal shipping and handling conditions.

Incompatibilities

Strong oxidizing agents.

Decomposition

Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide, hydrogen fluoride.

More
Less

ContactMore

Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Wuhan FengyaoTonghui Chemical Products Co., Ltd.
Tel
027-87466105
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList30440/0_EN.htm
TopScience Biochemical
Tel
00852-68527855
Fax
00852-26406298
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList892930/0.htm
CONIER CHEM AND PHARMA LIMITED
WebSite
http://www.conier.com/
Wuhan kamik Technology Co., Ltd
WebSite
https://b2b.baidu.com/shop/42320173