Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Enanthic chloride > Enanthic chloride(2528-61-2)

Enanthic chloride(2528-61-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Enanthic chloride

Synonyms

Enanthoyl chloride
Enanthyl chloride
Heptanoic acid chloride

CAS

2528-61-2

Formula

C7H13ClO

Molecular Weight

148.63

EINECS

219-775-3

Beilstein/Gmelin

605636

Beilstein Reference

4-02-00-00963

More
Less

Physical and Chemical Properties

Appearance

Brown liquid.

Solubility in water

Insoluble

Melting Point

-83.8

Boiling Point

173

Density

0.9669 g/cm3 (15 C)

Refractive Index

1.4345 (18 C)

More
Less

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Ground and bond containers when transferring material. Do not get on skin and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns.

Inhalation

May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema.

Skin

Causes skin burns.

Eyes

Causes eye burns. Lachrymator.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 34 37

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

2920

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

More
Less

Fire Fighting Measures

Flash Point

57

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode when heated. Extinguishing media: Do NOT use water directly on fire. Use water spray to cool fire-exposed containers. Use carbon dioxide or dry chemical. Do NOT get water inside containers. Cool containers with flooding quantities of water until well after fire is out.

Fire Potential

Flammable/combustible material. May be ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Remove all sources of ignition. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.

More
Less

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Water, alcohols, oxidizing agents, strong bases.

Decomposition

Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.

Combustion Products

Fire will produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

2920

Hazard Class

8

Packing Group

I; II

More
Less

ContactMore

Shanghai mayao chemical technology co., ltd.
Tel
021-51068321
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList349145/0.htm
Shanghai Qiao Chemical Science Co., Ltd
Tel
021-58892003
WebSite
https://www.chemicalbook.com/supplier/10168672/1.htm
CANGZHOU RUNLIQING CHEMICAL CO.,LTD
Tel
199-6973-4477
WebSite
http://www.rlqhg.com/
Zibo Ward Chemical Technology Co., Ltd.
Tel
0533-3585309
WebSite
http://www.zbwode.com
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com