Product Identification

Product Name

2,4-Dibromothiophene

CAS

3140-92-9

Formula

C4H2Br2S

Molecular Weight

241.92

Beilstein/Gmelin

107651

Beilstein Reference

5-17-01-00308

Physical and Chemical Properties

Appearance

Clear very slight brown liquid.

Solubility in water

Insoluble

Melting Point

-30

Boiling Point

215

Density

2.14 g/cm3

Vapor Density

8.3

Refractive Index

1.6321 (20 C)

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.

Hazards Identification

Inhalation

Causes respiratory tract irritation. Can produce delayed pulmonary edema.

Skin

Causes skin irritation.

Eyes

Causes eye irritation. May cause chemical conjunctivitis.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

EC Risk Phrase

R 36/38

EC Safety Phrase

S 26 36

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide.