Product Identification

Product Name

1,2-Dichloro-4-(chloromethyl)benzene

Synonyms

,3,4-Trichlorotoluene
3,4-Dichlorobenzyl chloride
3,4-Dichlorophenylmethyl chloride

CAS

102-47-6

Formula

C7H5Cl3

Molecular Weight

195.48

EINECS

203-033-0

Beilstein/Gmelin

386644

Beilstein Reference

4-05-00-00820

EC Class

corrosive

Physical and Chemical Properties

Appearance

Clear, light yellow liquid.

Solubility in water

Insoluble

Melting Point

37.5

Boiling Point

241

Vapor Pressure

0.06 (25 C)

Density

1.41 g/cm3

Partition Coefficient

3.55

Heat Of Vaporization

45.9 kJ/mol

Vapor Density

6.74

Refractive Index

1.577 (24 C)

First Aid Measures

Ingestion

Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Get medical aid. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage

Keep away from sources of ignition. Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Discard contaminated shoes.

Hazards Identification

Inhalation

Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. May cause systemic effects.

Skin

Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.

Eyes

Causes eye burns. Produces irritation, characterized by a burning sensation, redness, tearing, inflammation, and possible corneal injury. Lachrymator. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. The toxicological properties of this substance have not been fully investigated. May cause systemic effects.

Hazards

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.

EC Risk Phrase

R 34 36

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

3265

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Flash Point

110

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Contact with water or steam may produce toxic and flammable vapors.

Fire Potential

Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Incompatibilities

Strong acids, strong bases, strong oxidizing agents.

Decomposition

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

3265

Hazard Class

8

Packing Group

I; II; III

HS Code

2903 69 90