Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 2,4-Dimethylbenzenethiol > 2,4-Dimethylbenzenethiol(13616-82-5)

2,4-Dimethylbenzenethiol(13616-82-5)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

2,4-Dimethylbenzenethiol

Synonyms

2,4-Dimethylbenzenethiol
2,4-Dimethylthiophenol
2,4-Thioxylenol

CAS

13616-82-5

Formula

C8H10S

Molecular Weight

138.22

EINECS

237-100-0

Beilstein/Gmelin

2040351

Beilstein Reference

4-06-00-03138

More
Less

Physical and Chemical Properties

Appearance

Light yellow - colorless liquid. With a stench.

Solubility in water

Insoluble

Boiling Point

207 - 208

Density

1.027 g/cm3 (20 C)

pKa/pKb

7.02 (pKa)

Vapor Density

4.77

Refractive Index

1.571 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Wash clothing before reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Ingestion

Causes gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.

Inhalation

Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

Causes skin irritation.

Eyes

Causes eye irritation.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

UN (DOT)

1993

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

More
Less

Fire Fighting Measures

Flash Point

58

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. In case of fire use water spray, dry chemical, carbon dioxide, or chemical foam. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Incompatibilities

Strong oxidizing agents, strong bases.

Decomposition

Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

More
Less

ContactMore

Jinan Winsor Pharmaceutical Co., Ltd
Tel
152-64160071
Fax
QQ:1790106626
WebSite
http://www.xinhechem.cn/
Shaanxi DIDU pharmaceutical and Chemical Co., Ltd
Tel
029-029-81148696
WebSite
http://www.dideu.cn
Shanghai AECOM Biotechnology Co. , Ltd.
Tel
021-021-20956531
Fax
021-20956532
WebSite
https://www.aykbio.com
Beijing FaMu RuiSi Pharmaceuticals Co.,Ltd
Fax
86-010-61252196
WebSite
http://www.pharmbj.com
Guangdong wengjiang Chemical Reagent Co., Ltd.
Tel
0751-2815688
Fax
0751-8963795
WebSite
http://www.wj-chem.com