Product Identification

Product Name

Poly(dimethylsiloxane)

Synonyms

Dimethylpolysiloxane
Silastic
Silicone oil

CAS

63148-62-9

EINECS

213-915-7

RTECS

VX6390000

RTECS Class

Primary Irritant

Beilstein/Gmelin

NA

Physical and Chemical Properties

Appearance

Colorless, viscous liquid.

Solubility in water

Insoluble

Melting Point

-50

Density

0.96 g/cm3

Usage

Lubricant.

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.

Inhalation

Remove from exposure to fresh air immediately. Get medical aid if cough or other symptoms appear.

Skin

Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container.

Handling

Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation.

Hazards Identification

Ingestion

Ingestion of large amounts may cause gastrointestinal irritation.

Inhalation

May cause respiratory tract irritation.

Skin

May cause skin irritation.

Eyes

Causes eye irritation.

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Poison Class

-

Fire Fighting Measures

Flash Point

300

Autoignition

450

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizers.

Decomposition

Silicon oxide.