Product Identification

Product Name

1-Bromo-3,5-dichlorobenzene

CAS

19752-55-7

Formula

C6H3BrCl2

Molecular Weight

225.89

EINECS

243-270-7

Beilstein/Gmelin

1931524

Beilstein Reference

2-05-00-00162

Physical and Chemical Properties

Appearance

White crystalline powder.

Melting Point

82 - 84

Boiling Point

227

First Aid Measures

Ingestion

Get medical aid. Wash mouth out with water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Store in a cool, dry place. Store in a tightly closed container.

Handling

Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.

Hazards Identification

Ingestion

May cause irritation of the digestive tract.

Inhalation

Causes respiratory tract irritation.

Skin

Causes skin irritation.

Eyes

Causes eye irritation.

EC Risk Phrase

R 36/37/38

EC Safety Phrase

S 26 36

Exposure Controls/Personal Protection

Personal Protection

Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Flash Point

> 110

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. To extinguish fire use water spray, dry chemical, carbon dioxide, or chemical foam.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Vacuum or sweep up material and place into a suitable disposal container.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride.