2,5-Dimethylbenzyl chloride(824-45-3)
Product Identification
Product Name
2,5-Dimethylbenzyl chloride
Synonyms
(Chloromethyl)-p-xylene
1-(Chloromethyl)-2,5-dimethylbenzene
1,4-Dimethyl-2-chloromethylbenzene
2,5-Dimethylbenzyl chloride
Benzene, 2-(chloromethyl)-1,4-dimethyl-
CAS
824-45-3
Formula
C9H11Cl
Molecular Weight
154.63
EINECS
212-529-6
Beilstein/Gmelin
2206277
Beilstein Reference
4-05-00-01013
First Aid Measures
Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Skin
Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
Handling and Storage
Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.
Handling
Wash thoroughly after handling. Use only in a well ventilated area. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Hazards Identification
Inhalation
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects. Inhalation at high concentrations may cause CNS depression and asphixiation.
Skin
Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Eyes
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Hazards
Contact with metals may evolve flammable hydrogen gas.
EC Risk Phrase
R 34 36
EC Safety Phrase
S 26 36/37/39 45
UN (DOT)
1760
Exposure Controls/Personal Protection
Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
Effects may be delayed.
Fire Fighting Measures
Flash Point
65
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Extinguishing media: Use water spray to cool fire-exposed containers. Do NOT get water inside containers. For small fires, use dry chemical, carbon dioxide, or water spray. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Fire Potential
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Stability and Reactivity
Incompatibilities
Oxidizing agents
Stability
Stable at room temperature in closed containers under normal storage and handling conditions.
Decomposition
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Combustion Products
Fire may produce irritating, corrosive and/or toxic gases.
ContactMore
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com
- Tel
- 021-61259108
- Fax
- 86-21-61259102
- WebSite
- https://www.meryer.com/cn/index/
- Tel
- 400-6106006
- Fax
- 021-67582001/03/05
- WebSite
- http://chemicals.thermofisher.cn
- Tel
- 021-67121386
- Fax
- 021-67121385
- WebSite
- https://www.tcichemicals.com/CN/zh/
- Tel
- 86-027-67849912
- Fax
- 86-027-87531808
- WebSite
- http://www.chemwish.com