Methyl hexadecanoate(112-39-0)
Physical and Chemical Properties
Appearance
Colorless solid.
Solubility in water
Insoluble
Melting Point
29.9
Boiling Point
417
Vapor Pressure
0.00015 (25 C)
Density
0.8804 g/cm3 (20 C)
Partition Coefficient
7.38
Heat Of Vaporization
96.49 kJ/mol
Usage
Intermediate for detergents, emulsifiers, wetting agents, stabilizers, resins, lubricants, plasticizers, animal feeds, medical research.
Refractive Index
1.45 (20 C)
First Aid Measures
Ingestion
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.
Eyes
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Handling and Storage
Storage
Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.
Handling
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Use with adequate ventilation.
Exposure Controls/Personal Protection
Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
The toxicological properties of this substance have not been fully investigated.
Poison Class
-
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Wash area with soap and water. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.
ContactMore
- Tel
- 021-69106960
- Fax
- 021-69106780
- WebSite
- http://www.bangchengchem.com/
- Tel
- 021-66690837
- WebSite
- https://www.zfshsy.com
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com
- Tel
- 021-61259108
- Fax
- 86-21-61259102
- WebSite
- https://www.meryer.com/cn/index/
- Tel
- 400-0066400
- Fax
- 021-55660885
- WebSite
- http://www.jonln.com