tert-Amyl peroxy-2-ethylhexanoate(686-31-7)
Product Identification
Product Name
tert-Amyl peroxy-2-ethylhexanoate
Synonyms
Esperox 570
Hexaneperoxoic acid, 2-ethyl-, 1,1-dimethylpropyl ester
Lupersol 575
tert-Pentyl 2-ethylperoxyhexanoate
tert-Pentyl peroxy-2-ethylhexanoate
Trigonox
CAS
686-31-7
Formula
C13H26O3
Molecular Weight
230.35
EINECS
211-687-3
RTECS
SE0540000
Beilstein/Gmelin
1866031
Physical and Chemical Properties
Appearance
Clear liquid with a faint, sweet odor.
Solubility in water
Insoluble
Melting Point
-62
Boiling Point
268
Vapor Pressure
0.008 (25 C)
Density
0.903 g/cm3 (20 C)
Partition Coefficient
5.12
Heat Of Vaporization
50.6 kJ/mol
Vapor Density
7.9
Refractive Index
1.435 (20 C)
First Aid Measures
Ingestion
Do not induce vomiting. Seek medical assistance.
Inhalation
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult.
Skin
Remove and isolate contaminated clothing and shoes. Remove material from skin immediately. Immediately flush with running water for at least 20 minutes.
Eyes
Immediately flush with running water for at least 20 minutes.
Handling and Storage
Storage
Store below 10 C. Keep containers closed when not in use.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards Identification
Ingestion
See Inhalation.
Inhalation
May cause severe injury or burns.
Skin
See Inhalation.
Eyes
May cause mild, transient irritation.
Hazards
Sensitive to temperature rises. Above a given Control Temperature they decompose violently and catch fire. May ignite combustibles (wood, paper, oil, clothing, etc.). May ignite spontaneously if exposed to air. May be ignited by heat, sparks or flames. May burn rapidly with flare-burning effect. Containers may explode when heated. Runoff may create fire or explosion hazard.
UN (DOT)
2898
Fire Fighting Measures
Flash Point
71
Fire Fighting
The temperature of the substance must be maintained at or below the Control Temperature at all times. SMALL FIRES: Water spray or fog is preferred; if water not available use dry chemical, carbon dioxide or regular foam. LARGE FIRES: Flood fire area with water from a distance. Use water spray or fog; do not use straight streams. Move containers from fire area if you can do it without risk. Do not move cargo or vehicle if cargo has been exposed to heat. Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. BEWARE OF POSSIBLE CONTAINER EXPLOSION. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles; if this is impossible, withdraw from area and let fire burn.
Fire Potential
May explode from heat, contamination or loss of temperature control. Particularly sensitive to temperature rises.
Accidental Release Measures
Small spills/leaks
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Do not touch or walk through spilled material. Stop leak if you can do it without risk. SMALL SPILLS: Take up with inert, damp, noncombustible material using clean non-sparking tools and place into loosely covered plastic containers for later disposal.
ContactMore
- WebSite
- http://www.sinomorechem.com
- WebSite
- https://www.chemicalbook.com/manufacturer/henan-alfa-chemical-570/
- Tel
- +86 13288715578
- WebSite
- http://www.mojinchemical.com
- WebSite
- https://www.sdlookchem.com/
- Fax
- 0086-13651442114
- WebSite
- http://www.codchem.com/