Titanium tetrapropanolate(3087-37-4)
First Aid Measures
Ingestion
Wash mouth out with water if person is conscious.
Inhalation
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Skin
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Eyes
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Handling and Storage
Storage
Store in a cool, dry location, away from heat and open flame. Keep container tightly closed.
Handling
All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.
Hazards Identification
Inhalation
Causes irritation.
Skin
Causes irritation.
Eyes
Causes irritation.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. Substance may be transported hot.
EC Risk Phrase
R 10 36/38
EC Safety Phrase
S 26 36
UN (DOT)
2413
Exposure Controls/Personal Protection
Personal Protection
Wear protective gloves and clothing and safety goggles.
Respirators
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Exposure Effects
The toxological properties of this substance have not been fully investigated.
Accidental Release Measures
Small spills/leaks
Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Do not use water. Apply water spray or mist to knock down vapors. Land spill: Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags, foamed polyurethane, or foamed concrete. Absorb bulk liquid with fly ash, cement powder, or commercial sorbents. Water spill: Use natural barriers or oil spill control booms to limit spill travel. Remove trapped material with suction hoses.
ContactMore
- Tel
- 021-61259108
- Fax
- 86-21-61259102
- WebSite
- https://www.meryer.com/cn/index/
- Tel
- 400-6106006
- Fax
- 021-67582001/03/05
- WebSite
- http://chemicals.thermofisher.cn
- Tel
- 021-021-58432009
- Fax
- 021-58436166
- WebSite
- http://www.energy-chemical.com
- Tel
- 021-54306202
- WebSite
- https://www.hanhongsci.com
- Tel
- 4009903999
- Fax
- 0539-6365991
- WebSite
- http://www.xiyashiji.com