Product Identification

Product Name

17a-Hydroxy-6a-methyl-4-pregnene-3,20-dione acetate

Synonyms

(6-alpha)-17-(Acetyloxy)-6-methylpreg-4-ene-3,20-dione
(6-alpha)-Pregn-4-ene-3,20-dione, 17-(acetyloxy)-6-methyl
17-Acetoxy-6-alpha-methylprogesterone
17-alpha-Acetoxy-6-alpha-methylpregn-4-ene-3,20-dione
17-alpha-Acetoxy-6-alpha-methylprogesterone
Depo medroxyprogesterone acetate

CAS

71-58-9

Formula

C24H34O4

Molecular Weight

386.53

EINECS

200-757-9

RTECS

TU5010000

RTECS Class

Tumorigen; Drug; Mutagen; Reproductive Effector; Human Data; Hormone

Beilstein/Gmelin

2066112

Beilstein Reference

4-08-00-02212

Physical and Chemical Properties

Appearance

Odorless white to off-white microcrystalline powder.

Melting Point

207 - 209

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. IMMEDIATELY call a physician and be prepared to transport the victim to a hospital even if no symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Ingestion

See inhalation.

Inhalation

Symptoms of exposure to this compound include breast tenderness, galactorrhea, nervousness, insomnia, somnolence, fatigue, dizziness, thromboembolic phenomena such as thrombophlebitis, pulmonary embolism, pruritus, urticaria, angioneurotic edema, rash, anaphylaxis, alopecia, acne, hirsutism, nausea, jaundice, headache, hyperpyrexia, liver dysfunction, premenstrual-like syndrome, changes in libido, changes in appetite, cystitis-like syndrome, backache, loss of scalp hair.

Skin

See inhalation.

Eyes

See inhalation

Exposure Controls/Personal Protection

Personal Protection

Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHA regulations also permit other type safety glasses. Whre chemical resistant gloves. To prevent repeated or prolonged skin contact, wear impervious clothing and boots.

Respirators

Wear a NIOSH-approved half face respirator equipped with a combination filter cartridge, i.e. organic vapor/acid gas/HEPA (specific for organic vapors, HCl, acid gas, SO2 and a high efficiency particulate filter).

Fire Fighting Measures

Fire Fighting

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher.

Fire Potential

This material is probably combustible.

Accidental Release Measures

Small spills/leaks

If a spill of this chemical occurs, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with acetone and transfer the dampened material to a suitable container. Use absorbent paper dampened with acetone to pick up any remaining material. Seal your contaminated clothing and the absorbent paper in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with acetone followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

Stability and Reactivity

Incompatibilities

Flammable and/or toxic gases are generated by combination with with alkali metals, nitrides, and strong reducing agents Reacts with oxoacids and carboxylic acids to form esters plus water Incompatible with oxidizing agents.

Stability

No data.