Product Identification

Product Name

2-Chloro-6-fluorophenol

Synonyms

2-(3-Methylphenyl)ethanol
Benzeneethanol, 3-methyl-

CAS

2040-90-6

CAS

1875-89-4

Formula

C6H4ClFO

Formula

C9H12O

Molecular Weight

136.19

Molecular Weight

146.55000000000001

EINECS

217-508-5

Beilstein/Gmelin

2040906

Beilstein/Gmelin

1936441

Beilstein Reference

4-06-00-00880

Beilstein Reference

4-06-00-03240

Physical and Chemical Properties

Appearance

Clear very slight yellow.

Melting Point

65

Boiling Point

242

Boiling Point

199

Density

1.0127 g/cm3 (20 C)

Partition Coefficient

2.36

Refractive Index

1.5231

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.

Ingestion

Seek medical assistance.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Inhalation

Move victim to fresh air. Apply artificial respiration if victim is not breathing. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Skin

Remove and isolate contaminated clothing and shoes. Immediately flush with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Eyes

Immediately flush with running water for at least 20 minutes.

Handling and Storage

Storage

Store in a cool, dry place. Keep container closed when not in use.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.

Hazards Identification

Ingestion

See Inhalation.

Inhalation

TOXIC; inhalation, ingestion, or skin contact with material may cause severe injury or death. Effects of contact or inhalation may be delayed.

Skin

Contact with molten substance may cause severe burns to skin and eyes. See Inhalation.

Eyes

See Inhalation.

Hazards

Contact with metals may evolve flammable hydrogen gas.

EC Risk Phrase

R 23/24/25 36/37/38

EC Safety Phrase

S 22 26 36/37/39 45

UN (DOT)

2811

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear chemical goggles. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Personal Protection

Wear appropriate protective gloves, clothing and goggles.

Respirators

Wear positive pressure self-contained breathing apparatus (SCBA).

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

The toxicological properties of this material have not been investigated.

Fire Fighting Measures

Fire Fighting

Extinguish using agent most appropriate for surrounding fire.

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire.

Fire Potential

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment.

Small spills/leaks

ELIMINATE all ignition sources. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Irritating and toxic fumes and gases.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

2811