Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Diethylcarbamoyl chloride > Diethylcarbamoyl chloride(88-10-8)

Diethylcarbamoyl chloride(88-10-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Diethylcarbamoyl chloride

Synonyms

Diethylcarbamyl chloride

CAS

88-10-8

Formula

C5H10ClNO

Molecular Weight

135.59

EINECS

201-798-5

RTECS

FD4025000

RTECS Class

Tumorigen; Primary Irritant

Beilstein/Gmelin

472049

Beilstein Reference

5-22-01-00419

EC Index Number

607-229-00-0

EC Class

Carcinogenic Category 3; Harmful; Irritant

More
Less

Physical and Chemical Properties

Appearance

Clear, light brown liquid.

Solubility in water

Slightly soluble

Melting Point

53 - 55

Boiling Point

186

Vapor Pressure

0.68 (25 C)

Density

1.070 g/cm3 (20 C)

Partition Coefficient

1.3

Heat Of Vaporization

42.2 kJ/mol

Usage

Intermediate in synthesis of herbicides.

Vapor Density

4.1

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid. Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Discard contaminated shoes.

More
Less

Hazards Identification

Ingestion

May cause severe and permanent damage to the digestive tract. The toxicological properties of this substance have not been fully investigated.

Inhalation

May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. The toxicological properties of this substance have not been fully investigated.

Skin

Causes skin burns.

Eyes

Causes eye burns.

Hazards

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.

UN (DOT)

3265

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Poison Class

4

More
Less

Fire Fighting Measures

Flash Point

75

Autoignition

400

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Fire Potential

Combustible material: may burn but does not ignite readily.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

More
Less

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents.

Decomposition

Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

3265

Hazard Class

8

Packing Group

I; II; III

More
Less

ContactMore

Shandong Qianyuan Polymer Material Co. , Ltd.
Tel
18678041314
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList1245847/0.htm
Wuhan Beiguofeng Chemical Co.,Ltd.
Tel
027-82886682
WebSite
http://www.bgfchem.com/
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn