Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Dibutyl disulphide > Dibutyl disulphide(629-45-8)

Dibutyl disulphide(629-45-8)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Dibutyl disulphide

Synonyms

1-Butyldisulfanylbutane
5,6-Dithiadecane
Butyl disulfide
Di-n-butyl disulfide

CAS

629-45-8

Formula

C8H18S2

Molecular Weight

178.36

EINECS

211-091-3

Beilstein/Gmelin

1735184

Beilstein Reference

4-01-00-01562

More
Less

Physical and Chemical Properties

Appearance

Clear light yellow liquid. With a stench.

Solubility in water

Insoluble

Melting Point

-94

Boiling Point

229

Vapor Pressure

0.4 (25 C)

Density

0.9371 g/cm3 (20 C)

Vapor Density

6.16

Refractive Index

1.4895 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. May be harmful if inhaled. Can produce delayed pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

Causes skin irritation. May be harmful if absorbed through the skin. May cause cyanosis of the extremities.

Eyes

Causes eye irritation. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Prolonged or repeated skin contact may cause dermatitis. Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

92

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. To extinguish fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

More
Less

Stability and Reactivity

Disposal Code

1

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong bases, strong oxidizing agents, strong reducing agents.

Decomposition

Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen sulfide.

More
Less

Transport Information

HS Code

2930 90 70

More
Less

ContactMore

J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Beijing Donghualituo Techonlogy Development Co.,Ltd.
Tel
010-88425576
Fax
(+86)-10-88425546
WebSite
http://www.dhltchem.com/
TCI (Shanghai) Development Co., Ltd.
Tel
021-67121386
Fax
021-67121385
WebSite
https://www.tcichemicals.com/CN/zh/
Energy Chemical
Tel
021-021-58432009
Fax
021-58436166
WebSite
http://www.energy-chemical.com