Product Identification

Product Name

1,2-Diaminocyclohexane

Synonyms

1,2-Diaminocyclohexane
Cyclohexane-1,2-diamine

CAS

694-83-7

Formula

C6H14N2

Molecular Weight

114.19

EINECS

211-776-7

RTECS

GU8749500

RTECS Class

Primary Irritant

Beilstein/Gmelin

506142

Beilstein Reference

0-13-00-00001

EC Class

corrosive, sensitizing

Physical and Chemical Properties

Appearance

Clear dark yellow liquid.

Solubility in water

Very soluble

Melting Point

41 - 44

Boiling Point

192

Vapor Pressure

0.46 (25 C)

Density

0.93 g/cm3

pKa/pKb

3.47 (pKb)

Partition Coefficient

-.12

Heat Of Vaporization

42.0 kJ/mol

Usage

Major uses include synthesis of bicyclic pyrazine derivatives.

Vapor Density

3.94

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth respiration if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.

Skin

Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Do not breathe vapors.

Hazards Identification

Inhalation

Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. May cause systemic effects. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. Inhalation at high concentrations may cause CNS depression and asphixiation.

Skin

Causes skin burns. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.

Eyes

Causes eye burns. May cause chemical conjunctivitis and corneal damage.

Ingestion

May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.

Hazards

When heated, vapors may form explosive mixtures with air: indoors, outdoors, and sewers explosion hazards.

EC Risk Phrase

R 34 43

EC Safety Phrase

S 26 36/37/39 45

UN (DOT)

3267

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Flash Point

75

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Water may be ineffective. In case of fire, use carbon dioxide, dry chemical powder or appropriate foam.

Fire Potential

Combustible material: may burn but does not ignite readily.

Accidental Release Measures

Small spills/leaks

Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Use a spark-proof tool. Provide ventilation.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong acids, strong oxidizing agents, acid anhydrides, acid chlorides.

Decomposition

Nitrogen oxides, carbon monoxide, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

3267

Hazard Class

8

Packing Group

I; II; III

HS Code

2921 30 99