Product Identification

Product Name

1-Methylcyclohexanol

Synonyms

1-Hydroxy-1-methylcyclohexane
1-Methyl-1-cyclohexanol
1-Methylcyclohexyl alcohol
Cyclohexanol, 1-methyl-

CAS

590-67-0

Formula

C7H14O

Molecular Weight

114.19

EINECS

209-688-9

Beilstein/Gmelin

1900934

Beilstein Reference

4-06-00-00095

Physical and Chemical Properties

Appearance

Clear, colorless liquid or white solid.

Solubility in water

Slightly soluble

Melting Point

26

Boiling Point

168

Density

0.9282 g/cm3 (20 C)

Partition Coefficient

1.49

Vapor Density

3.94

Refractive Index

1.4595 (20 C)

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation

May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.

Skin

May cause skin irritation.

Eyes

May cause eye irritation.

Ingestion

May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 20

EC Safety Phrase

S 24/25

UN (DOT)

2617

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

The toxological properties of this substance have not been fully investigated.

Fire Fighting Measures

Flash Point

54

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Combustible Liquid. Extinguishing media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Upper exp. limit

7.7

Lower exp. limit

1.1

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents, acid anhydrides, acid chlorides.

Decomposition

Carbon monoxide, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

2617

Hazard Class

3

Packing Group

III