1-Amino-3-methoxypropane(5332-73-0)
Product Identification
Product Name
1-Amino-3-methoxypropane
Synonyms
1-Amino-3-methoxypropane
3-Methoxy-1-aminopropane
3-Methoxypropyl-1-amine
CAS
5332-73-0
Formula
C4H11NO
Molecular Weight
89.14
EINECS
226-241-3
RTECS
UI3335000
RTECS Class
Other
Beilstein/Gmelin
878144
Beilstein Reference
4-04-00-01623
EC Class
flammable, harmful, corrosive, sensitizing
First Aid Measures
Ingestion
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. DO NOT use mouth-to-mouth respiration.
Skin
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Eyes
Get medical aid immediately. Do NOT allow victim to rub or keep eyes closed. Extensive irrigation is required (at least 30 minutes).
Handling and Storage
Storage
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Store protected from moisture. Store under an inert atmosphere.
Handling
Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Store protected from air. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam.
Hazards Identification
Ingestion
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns.
Inhalation
Causes chemical burns to the respiratory tract. Vapors may cause dizziness or suffocation.
Skin
Causes skin burns.
Eyes
Causes eye burns.
Hazards
Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.
EC Risk Phrase
R 10 22 35 43
EC Safety Phrase
S 16 26 36/37/39 45
UN (DOT)
2920
Exposure Controls/Personal Protection
Personal Protection
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
Poison Class
3
Fire Fighting Measures
Flash Point
27
Autoignition
270
Fire Fighting
Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.
Upper exp. limit
12.3
Lower exp. limit
2.3
Fire Potential
Flammable/combustible material. May be ignited by heat, sparks or flames.
Accidental Release Measures
Small spills/leaks
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.
Stability and Reactivity
Disposal Code
5
Incompatibilities
Oxidizing agents.
Stability
Stable under normal temperatures and pressures.
Decomposition
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Combustion Products
Fire will produce irritating, corrosive and/or toxic gases.
ContactMore
- Tel
- 0533-13355330258
- WebSite
- http://www.shandongjiapeng.com/
- Tel
- 133-57705004
- Tel
- 022-022-58788819
- Fax
- 022-60321328
- WebSite
- http://www.realetchem.com
- Tel
- 022-66880623
- Fax
- 86(0)22-66880086
- WebSite
- http://www.tjzxchem.com
- Tel
- 010-82848833
- Fax
- 86-10-82849933
- WebSite
- http://www.jkchemical.com