Product Identification

Product Name

BEO

Synonyms

2-[4-(2-Hydroxyethoxy)but-2-ynoxy]ethanol
Ethanol, 2,2'-[2-butyne-1,4-diylbis(oxy)]bis-

CAS

1606-85-5

Formula

C8H14O4

Molecular Weight

174.19

EINECS

216-526-0

Beilstein/Gmelin

1634876

Physical and Chemical Properties

Appearance

Amber viscous liquid. Alcohol-like odor.

Boiling Point

71 - 72 (1 torr)

Density

1.14 g/cm3

Vapor Density

6.01

Refractive Index

1.4843 (20 C)

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.

Hazards Identification

Inhalation

Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Can produce delayed pulmonary edema.

Skin

Causes skin irritation.

Eyes

Causes eye irritation. May cause chemical conjunctivitis.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

Effects may be delayed.

Fire Fighting Measures

Flash Point

180

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Containers may explode when heated. Extinguishing media: Use agent most appropriate to extinguish fire. Cool containers with flooding quantities of water until well after fire is out. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Accidental Release Measures

Small spills/leaks

Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Provide ventilation.

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.