Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > 4-Bromo-3-(trifluoromethyl)aniline > 4-Bromo-3-(trifluoromethyl)aniline(393-36-2)

4-Bromo-3-(trifluoromethyl)aniline(393-36-2)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

4-Bromo-3-(trifluoromethyl)aniline

Synonyms

5-Amino-2-bromobenzotrifluoride
Benzenamine, 4-bromo-3-(trifluoromethyl)-

CAS

393-36-2

Formula

C7H5BrF3N

Molecular Weight

240.02

EINECS

206-885-1

Beilstein/Gmelin

641589

Beilstein Reference

4-12-00-01857

More
Less

Physical and Chemical Properties

Appearance

Beige powder.

Melting Point

55 - 56

Boiling Point

81 - 84 (0.5 torr)

More
Less

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Wash clothing before reuse.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Methemoglobinemia is characterized by dizziness, drowsiness, headache, breath shortness, cyanosis with bluish skin, rapid heart rate and chocolate-brown blood. Inhalation of aniline causes anoxia due to the formation of methemoglobinemia.

Skin

Causes skin irritation.

Eyes

Causes eye irritation.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Methemoglobinemia is characterized by dizziness, drowsiness, headache, breath shortness, cyanosis with bluish skin, rapid heart rate and chocolate-brown colored blood. May form methemoglobin which in sufficient concentration causes cyanosis.

Hazards

Contact with metals may evolve flammable hydrogen gas.

EC Risk Phrase

R 20/21/22 36/37/38

EC Safety Phrase

S 26 36/37/39

UN (DOT)

2811

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Exposure Effects

May cause methemoglobinemia, which is characterized by chocolate-brown colored blood, headache, weakness, dizziness, breath shortness, cyanosis, rapid heart rate, unconsciousness and possible death.

More
Less

Fire Fighting Measures

Flash Point

> 110

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

Fire Potential

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes.

More
Less

Accidental Release Measures

Small spills/leaks

Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Provide ventilation.

More
Less

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride, hydrogen bromide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

2811

Hazard Class

6.1

Packing Group

I; II; III

More
Less

ContactMore

Shanghai Qiao Chemical Science Co., Ltd
Tel
021-58892003
WebSite
https://www.chemicalbook.com/supplier/10168672/1.htm
Shanghai Boyle Chemical Co., Ltd.
Tel
021-50182298 021-50180596
Fax
+86-21-57758967
WebSite
http://www.boylechem.com
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Liaoning Tianhua Chemical Co., Ltd.
Tel
0418-6530555 2855550
Fax
+86-418-6502885
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList6177/0.htm
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn