Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
Home > 4-Bromo-2-fluoroanisole > 4-Bromo-2-fluoroanisole(2357-52-0)

4-Bromo-2-fluoroanisole(2357-52-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity
More
Less

Product Identification

Product Name

4-Bromo-2-fluoroanisole

Synonyms

4-Bromo-2-fluoro-1-methoxybenzene
Benzene, 4-bromo-2-fluoro-1-methoxy-

CAS

2357-52-0

Formula

C7H6BrFO

Molecular Weight

205.02

EINECS

219-096-2

Beilstein/Gmelin

3240714

Beilstein Reference

4-06-00-01057

More
Less

Physical and Chemical Properties

Appearance

Clear very slight yellow liquid.

Solubility in water

Insoluble

Melting Point

16

Boiling Point

215

Vapor Pressure

0.22 (25 C)

Density

1.59 g/cm3

Partition Coefficient

3.16

Heat Of Vaporization

43.3 kJ/mol

Vapor Density

7.07

Refractive Index

1.54 (20 C)

More
Less

First Aid Measures

Ingestion

Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. DO NOT use mouth-to-mouth respiration. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

More
Less

Handling and Storage

Storage

Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation.

More
Less

Hazards Identification

Inhalation

Causes respiratory tract irritation. Can produce delayed pulmonary edema.

Skin

Causes skin irritation.

Eyes

Causes eye irritation. May cause chemical conjunctivitis.

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea.

EC Risk Phrase

R 36/38

EC Safety Phrase

S 26 36

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

Effects may be delayed.

More
Less

Fire Fighting Measures

Flash Point

98

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. To extinguish fire use water spray, dry chemical, carbon dioxide, or appropriate foam.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Provide ventilation.

More
Less

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable at room temperature in closed containers under normal storage and handling conditions.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen fluoride, hydrogen bromide.

More
Less

ContactMore

Hangzhou Dingxing Technology Co., Ltd.
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList267451/0.htm
Nanjing Qishi Biotechnology Co. Ltd.
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList30914/0.htm
Shanghai Harvest Chemical Industrial Co., Ltd.
Tel
21-31038972
Fax
+86-21-51385350
WebSite
http://www.harvest-chem.com/
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/