Product Identification

Product Name

Dihydroxydiphenylsilane

Synonyms

Dihydroxydi(phenyl)silane
Diphenylsilanediol

CAS

947-42-2

Formula

C12H12O2Si

Molecular Weight

216.31

EINECS

213-427-4

RTECS

VV3640000

RTECS Class

Other

Beilstein/Gmelin

2523445

Beilstein Reference

4-16-00-01523

Physical and Chemical Properties

Appearance

White powder.

Melting Point

174

Boiling Point

377

Density

1.25 g/cm3

First Aid Measures

Ingestion

Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion

May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. Ingestion of large amounts may cause CNS depression.

Inhalation

The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation of dusts cause severe irritation of the upper respiratory tract, gastrointestinal disturbances, albuminuria, gradual loss of weight, and increasing weakness. May cause burning sensation in the chest.

Skin

May cause irritation and dermatitis. May cause cyanosis of the extremities.

Eyes

May cause eye irritation. May cause chemical conjunctivitis and corneal damage.

EC Risk Phrase

R 11 36/37/38

EC Safety Phrase

S 16 26 36

UN (DOT)

1325

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Fire Fighting Measures

Flash Point

54

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Dusts at sufficient concentrations can form explosive mixtures with air. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Dusts may be combustible when exposed to heat, flame, or oxidizing agents. Containers may explode in the heat of a fire. Flammable solid. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water.

Fire Potential

Flammable/combustible material. May be ignited by friction, heat, sparks or flames.

Accidental Release Measures

Small spills/leaks

Vacuum or sweep up material and place into a suitable disposal container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, using the appropriate protective equipment. Avoid generating dusty conditions. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Incompatibilities

Oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, silicon oxide.

Combustion Products

Fire may produce irritating and/or toxic gases.

Transport Information

UN Number

1325

Hazard Class

4.1

Packing Group

II; III