Product Identification

Product Name

2-Cyano-3-morpholinoacrylamide

Synonyms

2-Cyano-3-morpholin-4-ylprop-2-enamide
2-Propenamide, 2-cyano-3-(4-morpholinyl)-

CAS

25229-97-4

Formula

C8H11N3O2

Molecular Weight

181.19

EINECS

246-741-5

Beilstein/Gmelin

1212385

Physical and Chemical Properties

Appearance

Liquid.

Melting Point

173 - 175

Boiling Point

379

Partition Coefficient

-1.06

First Aid Measures

Ingestion

Get medical aid. Wash mouth out with water.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Handling and Storage

Storage

Store in a cool, dry place. Store in a tightly closed container.

Handling

Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Use only in a chemical fume hood.

Hazards Identification

Ingestion

May cause irritation of the digestive tract. May be harmful if swallowed.

Inhalation

Causes respiratory tract irritation. May be harmful if inhaled. May cause burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting.

Skin

Causes skin irritation. May be harmful if absorbed through the skin.

Eyes

Causes eye irritation.

Exposure Controls/Personal Protection

Personal Protection

Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Fire Fighting Measures

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Use foam, dry chemical, or carbon dioxide.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container.

Stability and Reactivity

Stability

No data.

Incompatibilities

Strong oxidizing agents, acids, acid chlorides, carbon dioxide, acid anhydrides.

Decomposition

Nitrogen oxides, carbon monoxide, carbon dioxide.