Product Identification

Product Name

(E)-2-Butenoic acid methyl ester

Synonyms

2-Butenoic acid, methyl ester, (2E)-
Methyl (E)-2-butenoate
Methyl (E)-but-2-enoate
Methyl E-propene-1-carboxylate
Methyl trans-crotonate
trans-2-Butenoic acid methyl ester

CAS

623-43-8

Formula

C5H8O2

Molecular Weight

100.12

EINECS

210-793-7

RTECS

GQ5710000

RTECS Class

Primary Irritant

Merck

13,2625

Beilstein/Gmelin

1720292

Beilstein Reference

4-02-00-01500

EC Class

highly flammable

Physical and Chemical Properties

Appearance

Colorless liquid.

Solubility in water

Slightly soluble

Boiling Point

118

Vapor Pressure

15 (25 C)

Density

0.9806 g/cm3 (4 C)

Partition Coefficient

1.32

Heat Of Vaporization

35.9 kJ/mol

Vapor Density

3.46

Refractive Index

1.4213 (20 C)

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Handling

Wash thoroughly after handling. Use only in a well ventilated area. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Ingestion

May cause irritation of the digestive tract.

Inhalation

Causes respiratory tract irritation. Vapors may cause dizziness or suffocation.

Skin

Causes moderate skin irritation.

Eyes

Causes eye irritation.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 11 36/37/38

EC Safety Phrase

S 16 26 36

UN (DOT)

1993

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

Poison Class

4

Fire Fighting Measures

Flash Point

4

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Use water spray to keep fire-exposed containers cool. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Containers may explode in the heat of a fire. Extinguishing media: For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Use agent most appropriate to extinguish fire.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. A vapor suppressing foam may be used to reduce vapors.

Stability and Reactivity

Disposal Code

1

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents, acids, bases, heat.

Decomposition

Carbon monoxide, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

HS Code

2916 19 80