Product Identification

Product Name

Butyraldehyde oxime

Synonyms

Butyraldehyde oxime

CAS

110-69-0

Formula

C4H9NO

Molecular Weight

87.14

EINECS

203-792-8

RTECS

ES3500000

RTECS Class

Tumorigen; Mutagen

Beilstein/Gmelin

1698799

Beilstein Reference

4-01-00-03234

EC Index Number

616-013-00-5

EC Class

Toxic; Harmful; Irritant

Physical and Chemical Properties

Appearance

Colorless liquid.

Solubility in water

Insoluble

Melting Point

-29.5

Boiling Point

152

Density

0.906 g/cm3 (20 C)

Partition Coefficient

.89

Usage

Used to make plastics and rubber.

Vapor Density

3.01

Refractive Index

1.43358 (20 C)

First Aid Measures

Ingestion

DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician.

Inhalation

IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used.

Skin

IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

Eyes

First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

Handling and Storage

Storage

Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.

Handling

All chemicals should be considered hazardous. Avoid direct physical contact. Use appropriate, approved safety equipment. Untrained individuals should not handle this chemical or its container. Handling should occur in a chemical fume hood.

Hazards Identification

Inhalation

Vapors may cause dizziness or suffocation. May cause irritation or burns.

Skin

May cause irritation or burns.

Eyes

See Skin.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. May polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.

EC Risk Phrase

R 22 24 36

EC Safety Phrase

S 23 36 45

UN (DOT)

2840

Exposure Controls/Personal Protection

Personal Protection

Wear appropriate protective gloves, clothing and goggles.

Respirators

Wear positive pressure self-contained breathing apparatus (SCBA).

Exposure Effects

The toxological properties of this substance have not been fully investigated.

Poison Class

3

Fire Fighting Measures

Flash Point

57.8 (closed cup)

Fire Fighting

Do not extinguish fire unless flow can be stopped. Use water in flooding quantities as fog. Solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Apply water from as far a distance as possible. Use alcohol foam, dry chemical or carbon dioxide. Keep run-off water out of sewers and water sources.

Fire Potential

HIGHLY FLAMMABLE.

Accidental Release Measures

Small spills/leaks

Keep sparks, flames, and other sources of ignition away. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Attempt to stop leak if without undue personnel hazard. Use water spray to knock-down vapors.

Stability and Reactivity

Incompatibilities

Incompatible with oxidizing materials Incompatible with metallic impurities May react with strong acids.

Stability

No data.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

Transport Information

UN Number

2840

Hazard Class

3

Packing Group

III