Product Identification

Product Name

2-Butoxyethyl acetate

Synonyms

2-Butoxyethyl acetate
Butyl glycol acetate

CAS

112-07-2

Formula

C8H16O3

Molecular Weight

160.21

EINECS

203-933-3

RTECS

KJ8925000

RTECS Class

Primary Irritant

Beilstein/Gmelin

1756960

Beilstein Reference

4-02-00-00215

EC Index Number

607-038-00-2

EC Class

Harmful

Physical and Chemical Properties

Appearance

Colorless liquid, pleasant, sweet, fruity odor.

Solubility in water

17 g/L

Melting Point

-64 - -62

Boiling Point

192

Vapor Pressure

0.5 (25 C)

Density

0.9416 g/cm3 (20 C)

Partition Coefficient

1.78

Heat Of Vaporization

42.8 kJ/mol

Heat Of Combustion

-5157 kJ/mol

Usage

High-boiling solvent for nitrocellulose lacquers, epoxy resins, multicolor lacquers, film coalescing aid for polyvinyl acetate latex.

Vapor Density

5.5

Saturation Concentration

395 ppm (0.03%) at 20 C (calculated)

Refractive Index

1.4154 (20 C)

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.

Inhalation

Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Handling

Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

Hazards Identification

Inhalation

May cause respiratory tract irritation.

Skin

Causes mild skin irritation. May be harmful if absorbed through the skin.

Eyes

May cause eye irritation.

Ingestion

May cause irritation of the digestive tract. May cause kidney damage. May cause central nervous system depression.

EC Risk Phrase

R 20/21

EC Safety Phrase

S 24

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.

Respirators

Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Exposure Effects

CNS depression, including coma, may occur following massive ingestions. Seizures have been reported following ingestions. Fetal toxicity has only been observed in animals at maternally toxic doses.

Exposure limit(s)

NIOSH REL: TWA 5 ppm (33 mg/m3)

Poison Class

4

Fire Fighting Measures

Flash Point

82

Autoignition

355

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible Liquid. May be ignited by heat, sparks, and flame. Containers may explode when heated. Extinguishing media: Use alcohol foam.

Upper exp. limit

8.4

Lower exp. limit

1.7

Fire Potential

Moderate fire hazard; when exposed to heat, flame or oxidizers.

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment. Remove all sources of ignition. Provide ventilation.

Stability and Reactivity

Disposal Code

1

Incompatibilities

Oxidizing agents.

Stability

Stable under normal temperatures and pressures.

Decomposition

Irritating and toxic fumes and gases.

Transport Information

HS Code

2915 39 90