Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
- Product Name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
- CAS No.
- 162881-26-7
- Chemical Name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
- Synonyms
- BAPO;IRGACURE 819;Photoinitiator 819;OMNIRAD 819;UV819;OMNIRAD 380;BIS(2,4,6-TRIMETHYLBENZOYL)PHENYLPHOSPHINE OXIDE;Phenylbis;(Phenylphosphoryl)bis(mesitylmethanone);PI-819
- CBNumber
- CB1126312
- Molecular Formula
- C26H27O3P
- Formula Weight
- 418.47
- MOL File
- 162881-26-7.mol
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide Property
- Melting point:
- 131-135 °C(lit.)
- Boiling point:
- 590.0±60.0 °C(Predicted)
- Density
- 1.17±0.1 g/cm3(Predicted)
- vapor pressure
- 0Pa at 20℃
- storage temp.
- Sealed in dry,Room Temperature
- solubility
- acetone, acetonitrile, toluene, and hexanedioldiacrylate: soluble
- form
- powder
- color
- Pale Yellow to Yellow
- Water Solubility
- 100μg/L at 20-21℃
- λmax
- 366nm(MeOH)(lit.)
- InChI
- InChI=1S/C26H27O3P/c1-16-12-18(3)23(19(4)13-16)25(27)30(29,22-10-8-7-9-11-22)26(28)24-20(5)14-17(2)15-21(24)6/h7-15H,1-6H3
- InChIKey
- GUCYFKSBFREPBC-UHFFFAOYSA-N
- SMILES
- P(C1C=CC=CC=1)(=O)(C(C1C(=CC(C)=CC=1C)C)=O)C(C1C(=CC(C)=CC=1C)C)=O
- LogP
- 5.77-5.8 at 22℃
- CAS DataBase Reference
- 162881-26-7
- EPA Substance Registry System
- Phosphine oxide, phenylbis(2,4,6-trimethylbenzoyl)- (162881-26-7)
Safety
- Hazard Codes
- Xi
- Risk Statements
- 43-53
- Safety Statements
- 22-24-37-61
- WGK Germany
- -
- HS Code
- 29319090
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H317May cause an allergic skin reaction
H413May cause long lasting harmful effects to aquatic life
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P272Contaminated work clothing should not be allowed out of the workplace.
P273Avoid release to the environment.
P280Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352IF ON SKIN: wash with plenty of soap and water.
P333+P313IF SKIN irritation or rash occurs: Get medical advice/attention.
N-Bromosuccinimide Price
- Product number
- 511447
- Product name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
- Purity
- 97%, powder
- Packaging
- 10g
- Price
- $67
- Updated
- 2024/03/01
- Product number
- 511447
- Product name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide
- Purity
- 97%, powder
- Packaging
- 50g
- Price
- $229
- Updated
- 2024/03/01
- Product number
- P2312
- Product name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide
- Purity
- >96.0%(GC)
- Packaging
- 5g
- Price
- $49
- Updated
- 2024/03/01
- Product number
- P2312
- Product name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide
- Purity
- >96.0%(GC)
- Packaging
- 25g
- Price
- $138
- Updated
- 2024/03/01
- Product number
- 8800AL
- Product name
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine Oxide
- Packaging
- 5g
- Price
- $27
- Updated
- 2021/12/16
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide Chemical Properties,Usage,Production
Description
Phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide can be used as a photoinitiator for: Radical polymerization of dental resins. It enhances the polymerization rate and conversion compared to other initiators. It is a polymer-based ceramic material modified with divinylbenzene for the preparation of high-temperature sensor applications.
Uses
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide is a useful research chemical compound.
Uses
Versatile UV photoinitiator for radical polymerization of unsaturated resins, especially pigmented formulations.
Preparation
Under nitrogen protection and room temperature, 1.4 g of zinc powder was added to the 100 mL reaction flask with stirring.15 ml of ethyl acetate, 4.1 g of 2,4,6-trimethyl benzoyl chloride, and a solution of 2.5 g of phenylphosphorus dichloride in 5 ml of ethyl acetate was added dropwise to the mixture. After that, the temperature was continued for 2 hours. After the completion of the reaction, 20 mL of water and 1.5 mL of 30% hydrogen peroxide were respectively added to the system, and the reaction was continued for half an hour. Saturated sodium bicarbonate solution was added to neutralize weakly alkaline. Finally, Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide was obtained after purification.
Definition
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (PPO) has a local absorption maximum in the visible spectrum at 405 nm and could provide sufficient initiating radicals to crosslink polyamic diacrylate ester in NMP[1]. Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (GR-XBPO) could be used as the reductant, and Monoethanolamine as the oxygen inhibition agent. After UV irradiation, oxygen-containing groups (OCGs) on the graphene oxide (GO) plane and edges are largely removed due to the reduction of GO by free radicals generated by photoinitiator decomposition[2].
References
[1] Maruti Hegde. “3D Printing All-Aromatic Polyimides using Mask-Projection Stereolithography: Processing the Nonprocessable.” Advanced Materials 29 31 (2017).
[2] Bing Xue, Yuchun Yang, Yingquan Zou. “A UV-light induced photochemical method for graphene oxide reduction.” Journal of Materials Science 52 21 (2017): 12742–12750.
Application
Photoinitiator 819 (HRcure-819) can also be used in colored UV-curable plastic coatings. UV coatings have been widely used on plastic shells of various electronic and household appliances due to their excellent performance and efficient production. However, the deep curing of UV coatings after coloring is not good, resulting in poor film adhesion and poor dispersion and arrangement of pigments by UV resins, which seriously affect the appearance of the coatings. Therefore, the traditional construction process is to paint solvent-based colored primer first; after baking, apply UV varnish to improve the physical properties of the film surface.
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide Preparation Products And Raw materials
Raw materials
Preparation Products
Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide Suppliers
- Tel
- 18357035212
- 757514698@qq.com
- Country
- China
- ProdList
- 27
- Advantage
- 58
- Tel
- 022-66880623
- Fax
- 86(0)22-66880086
- sales@tjzxchem.com
- Country
- China
- ProdList
- 614
- Advantage
- 60
- Tel
- 021-52080993 13917193189
- Fax
- 021-5208 0930，010-62620366，020-32008365
- selene.wu@igmresins.com
- Country
- China
- ProdList
- 89
- Advantage
- 57
- Tel
- 021-67121386
- Fax
- 021-67121385
- Sales-CN@TCIchemicals.com
- Country
- China
- ProdList
- 24539
- Advantage
- 81
- Tel
- 021-021-58432009 400-005-6266
- Fax
- 021-58436166
- sales8178@energy-chemical.com
- Country
- China
- ProdList
- 44751
- Advantage
- 61
- Tel
- 21-62165282 15801962796;
- Fax
- 021 61153784
- bidingchem@163.com
- Country
- China
- ProdList
- 1165
- Advantage
- 60
- Tel
- 0712-0712-2580635 15527768850
- 1791901229@qq.com
- Country
- China
- ProdList
- 8849
- Advantage
- 52
- Tel
- 025-84712192
- Fax
- 025-84712052
- china@chembridge.net
- Country
- China
- ProdList
- 192
- Advantage
- 62
- Tel
- 400-1166-196 18981987031
- Fax
- 028-84555506 800101999
- cdhxsj@163.com
- Country
- China
- ProdList
- 11726
- Advantage
- 57
- Tel
- 400 638 7771
- sales@heowns.com
- Country
- China
- ProdList
- 14443
- Advantage
- 57
View Lastest Price from Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide manufacturers
- Product
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide 162881-26-7
- Price
- US $10.00-3.00/KG
- Min. Order
- 1KG
- Purity
- 99%
- Supply Ability
- g-kg-tons, free sample is available
- Release date
- 2024-04-26
- Product
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide 162881-26-7
- Price
- US $0.00-0.00/kg
- Min. Order
- 1kg
- Purity
- 99
- Supply Ability
- 200tons
- Release date
- 2024-04-17
- Product
- Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide 162881-26-7
- Price
- US $0.00/kg
- Min. Order
- 1kg
- Purity
- 99%
- Supply Ability
- 2000ton
- Release date
- 2023-08-28