Trimethylolpropane triacrylate Property

Melting point:

-66°C

Boiling point:

>200°C

Density 

1.1 g/mL at 25 °C (lit.)

vapor density 

>1 (vs air)

vapor pressure 

<0.01 mm Hg ( 20 °C)

refractive index 

n20/D 1.474(lit.)

Flash point:

>230 °F

storage temp. 

Refrigerator

form 

Liquid

pka

0[at 20 ℃]

Specific Gravity

1.1

color 

Colorless to Light yellow to Light orange

Water Solubility 

Miscible with water.

FreezingPoint 

-66

InChIKey

DAKWPKUUDNSNPN-UHFFFAOYSA-N

LogP

4.35 at 20℃

CAS DataBase Reference

15625-89-5(CAS DataBase Reference)

IARC

2B (Vol. 122) 2019

NIST Chemistry Reference

TMPTA (Trimethylol propane triacrylate)(15625-89-5)

EPA Substance Registry System

Trimethylolpropane triacrylate (15625-89-5)

Safety

Hazard Codes 

Xi

Risk Statements 

36/38-43

Safety Statements 

39

WGK Germany 

1

RTECS 

AT4810000

TSCA 

Yes

HS Code 

29161290

Hazardous Substances Data

15625-89-5(Hazardous Substances Data)

Toxicity

LD50 oral in rat: 5190uL/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H315Causes skin irritation

H317May cause an allergic skin reaction

H319Causes serious eye irritation

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

Trimethylolpropane triacrylate Chemical Properties,Usage,Production

Description

Trimethylolpropane triacrylate (TMPTA) is a multifunctional acrylie monomer. It reacts with propyleneimine to form polyfunctional aziridine. Sensitization was observed in a textile fabric printer. Patch tests were positive with the polyfunctional aziridine hardener, but were negative to TMPTA. TMPTA caused contact dermatitis in an optic-fiber manufacturing worker and was reported as a sensitizer in a floor top coat or in photopolymerizable inks.

Chemical Properties

Colorless viscid liquid

Uses

Trimethylol propane triacrylate is a triacrylate for use in UV -curable lithographic inks, varnishes, artificial nails, wood finish solder, and etch resists in the electronics industry.

Uses

Trimethylolpropane triacrylate has important properties like low volatility, resistance against weather, chemical, water and abrasion, and immediate curing property. The above mentioned properties prompted its use in the production of adhesives, plastics, sealant chemicals, paint additives, photosensitive chemicals, ink and toner. It finds application in alkyd coatings, dental polymers, compact discs, hardwood floors, concrete polymers, screen printing, elastomers, automobile headlamps, acrylics and plastic components for the medical industry.

Preparation

Synthesis of trimethylolpropane triacrylate: 2.44 kg of trimethylolpropane, 3.93 kg of acrylic acid, 0.5 kg of an acid ion exchanger (Lewatit 3333 of BAYER AG), 9 g of hydroquinone and 1.5 liters of petroleum ether (boiling range 60° to 70° C) were heated under a water separator, whilst stirring, in a 10 liter three-necked flask equipped with a stirrer, water separator and gas inlet tube. At the same time, a constant stream of air saturated with allyl alcohol was passed through the flask at a rate of 2 liters/hour. In total, 16 ml of allyl alcohol were introduced into the esterification mixture in this way. After 80 hours, the reaction mixture had an acid number of 32 and the boiling point had risen to 72° C. The petroleum ether was distilled off, remnants being removed by applying a vacuum of 0.2 mm Hg at a product temperature of 40° C. The esterification catalyst was separated off by filtration and was kept for further use. The trimethylolpropane triacrylate obtained in practically quantitative yield was pale yellowish and clear. The viscosity corresponded to a time of outflow of 20 seconds measured in a DIN cup 4 at 20° C. The product showed no change even on storage for 4 months at 60° C. When used in a UV light-curing printing ink which contained a photoinitiator, the product polymerised at high speed.
Literature source US04059721

Definition

ChEBI: Trimethylolpropane triacrylate is a carbonyl compound.

Flammability and Explosibility

Not classified