Nitrosylsulfuric acid Property

Melting point:

-10 °C

Boiling point:

333℃ at 101.33kPa

Density 

1.612 g/mL at 25 °C

vapor pressure 

2.6-30Pa at 20-50℃

storage temp. 

Refrigerator (+4°C)

solubility 

reacts with H2O; soluble in H2SO4

pka

-7.51±0.18(Predicted)

form 

Viscous Liquid

color 

Clear to milky yellow to greenish

Water Solubility 

decomposes

Merck 

13,6682

InChIKey

VQTGUFBGYOIUFS-UHFFFAOYSA-N

CAS DataBase Reference

7782-78-7(CAS DataBase Reference)

EPA Substance Registry System

Sulfuric acid, monoanhydride with nitrous acid (7782-78-7)

Safety

Hazard Codes 

O,T

Risk Statements 

8-14-23/24/25-35-34

Safety Statements 

17-26-36/37/39-45-27

RIDADR 

UN 3264 8/PG 2

WGK Germany 

3

HazardClass 

8

PackingGroup 

II

HS Code 

28111980

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H272May intensify fire; oxidizer

H290May be corrosive to metals

H314Causes severe skin burns and eye damage

H332Harmful if inhaled

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.

Nitrosylsulfuric acid Chemical Properties,Usage,Production

Chemical Properties

Nitrosylsulfuric acid, HNO₅S, is a straw-colored, oily liquid furnished as a 40% solution in 87% sulfuric acid,and stable at room temperature. It is used as a diazotizing agent for dyes,chemical intermediate, drugs and pharmaceuticals.

Physical properties

Nitrosylsulfuric acid is produced as an intermediate in the manufacture of sulfuric acid using the lead chamber process by the reaction of sulfur dioxide, nitrogen dioxide, oxygen, and water.
Nitrosylsulfuric acid also is made from absorption of nitrogen oxides (NO_x) in oleum (fuming sulfuric acid):
N₂O₃ + 2H₂SO₄ → 2ONSO₄ + H₂O
or by the reaction of nitrosyl chloride with concentrated sulfuric acid:
ClNO + H₂SO₄ → ONSO₄ + HCl
Another method of preparation involves the reaction of nitrosyl bromide with silver bisulfate:
AgHSO₄ + BrNO → ONHSO₄ + AgBr
In making disperse azo dyes, nitrosylsulfuric acid is produced by the addition of sodium nitrite, NaNO₂, to concentrated sulfuric acid (1g NaNO₂ per 13 g H₂SO₄).

Uses

Nitrosylsulfuric acid (40?wt. % in sulfuric acid) is a reagent used for the preparation of new heterocyclic disperse azo dyes.

Uses

Nitrosylsulfuric acid is used for diazotisation, nitrosation, oxidation and oximation reactions. Product Data Sheet

Uses

For bleaching cereal milling products.

General Description

Shipped in solution with sulfuric acid (solutions are usually 40% Nitrosylsulfuric acid and 54% sulfuric acid (Hawley)). Solution is a straw-colored oily liquid with a sharp odor. When pure, a crystalline solid decomposing at 73°C. Very irritating to skin and eyes. Used to make dyes and other chemicals.

Reactivity Profile

Nitrosylsulfuric acid is an oxidizing agent. Neutralizes chemical bases in exothermic reactions. An attempt to diazotize dinitroaniline using Nitrosylsulfuric acid resulted in an explosion with loss of life. The event was blamed on the high concentration of the reactants dinitroaniline hydrochloride and Nitrosylsulfuric acid [MCA Case History 1763. 1971].

Hazard

Strong irritant to skin and mucous membranes.

Health Hazard

TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.

Safety Profile

A poison. A corrosive irritant to skin, eyes, and mucous membranes. Explosive reaction above 50°C with 2-chloro-4,6-dinitroaniline and 4- chloro-2,6-d1nitroalne. Potentially explosive reaction with dmitroaniline. When heated to decomposition it emits toxic fumes of SOx and NOx. See also SULFATES and NITRATES.