Ammonium sulfamate Property

Melting point:

131-135 °C (lit.)

Boiling point:

160°C

Density 

1.769

vapor pressure 

0Pa at 20℃

Flash point:

160°C

storage temp. 

no restrictions.

solubility 

H₂O: 1 M at 20 °C, clear, colorless

form 

Crystalline Powder

color 

White

PH

5.0-6.0 (50g/l, H2O, 20℃)

Odor

Slight amine odor

PH Range

4.5 - 6.0

Water Solubility 

1950 g/L (20 ºC)

Sensitive 

Air & Moisture Sensitive

Merck 

14,554

Exposure limits

ACGIH: TWA 10 mg/m3
OSHA: TWA 15 mg/m3; TWA 5 mg/m3
NIOSH: IDLH 1500 mg/m3; TWA 10 mg/m3; TWA 5 mg/m3

Stability:

Stable. Incompatible with strong acids, strong oxidizing agents.

InChIKey

GEHMBYLTCISYNY-UHFFFAOYSA-N

LogP

-4.34 at 20℃

CAS DataBase Reference

7773-06-0(CAS DataBase Reference)

NIST Chemistry Reference

Ammonium sulfamate(7773-06-0)

EPA Substance Registry System

Ammonium sulfamate (7773-06-0)

Safety

Hazard Codes 

Xn,N

Risk Statements 

22-50

Safety Statements 

24/25-22-61

OEB

B

OEL

TWA: 10 mg/m3 (total)

WGK Germany 

1

RTECS 

WO6125000

F 

3-10

TSCA 

Yes

HS Code 

29222100

Hazardous Substances Data

7773-06-0(Hazardous Substances Data)

Toxicity

LD50 orally in rats: 3.0 g/kg (Ambrose)

IDLA

1,500 mg/m3

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Warning

Hazard statements

H302Harmful if swallowed

H319Causes serious eye irritation

H335May cause respiratory irritation

H336May cause drowsiness or dizziness

H400Very toxic to aquatic life

Precautionary statements

P261Avoid breathing dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P330Rinse mouth.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P405Store locked up.

P501Dispose of contents/container to..…

Ammonium sulfamate Chemical Properties,Usage,Production

Description

Ammonium sulfamate (or ammonium sulphamate) is a white crystalline solid, readily soluble in water. It is a salt formed from ammonia and sulfamic acid. Based on its good performance, it is widely used in industrial production and scientific research. Ammonium sulfamate is used as a herbicide, a composting accelerator in horticultural settings, a flame retardant, and so on.

Chemical Properties

Ammonium sulfamate is a white to yellow crystalline solid.

Application

Ammonium sulfamate could be widely used in pesticides, printing and dyeing, tobacco, building materials, textiles, and other industries. It could used as an analytical reagent. It could also used in the manufacture of fire-retardant compositions, for flameproofing textiles and paper products, and in the manufacture of weed-killing compositions. It is also used in electroplating solutions and could used for the generation of nitrous oxide gas.

Uses

Ammonium sulfamate (AMS) is an inorganic herbicide used for control of woody plants and herbaceous perennials.

Definition

ChEBI: Ammonium sulfamate is an organic molecular entity.

Preparation

Ammonium sulfamate is prepared continuously, starting from ammonia and sulfur trioxide, in which liquid sulfur trioxide and liquid ammonia are introduced in a molar ratio NH3 /SO3 greater than 2.0:1 into a pressure reactor containing the reaction product in the molten state, excess ammonia being removed continuously from the reactor and the liquid sulfur trioxide being introduced into the melt.

General Description

Ammonium sulfamate is a white crystalline solid. Ammonium sulfamate is soluble in water. The primary hazard is the threat to the environment. Immediate steps should be taken to limit its spread to the environment. Ammonium sulfamate is used to flameproof fabrics and papers, in weed or brush killing products, and for other uses.

Air & Water Reactions

Water soluble. Hot water [Note: Elevated temperatures cause a highly exothermic reaction with water (in the presence of acid)] .

Reactivity Profile

Ammonium sulfamate is incompatible with the following: Acids, hot water [Note: Elevated temperatures cause a highly exothermic reaction with water (in the presence of acid).] .

Hazard

Hot acid solutions when enclosed may explode.

Health Hazard

Inhalation causes irritation of nose and throat. Ingestion causes gastrointestinal disturbances. Dust irritates eyes.

Fire Hazard

Special Hazards of Combustion Products: Toxic oxides of nitrogen may form in fires.

Safety Profile

Moderately toxic by ingestion and intraperitoneal routes. Somewhat explosive when heated or by spontaneous chemical reaction in a hot acid solution. A powerful oxidizer. When heated to decomposition it emits very toxic fumes of NH3, NOx, and SOx. See also SULFONATES and SULFAMIC ACID.

Potential Exposure

Ammonium sulfamate is used as a herbicide and in compositions for retarding flame in textiles and paper products; a softener for paper, cotton textiles.

Carcinogenicity

The oral LD50 values were 3900 mg/kg for rats and 5760 mg/kg for mice.

Shipping

UN3077 Environmentally hazardous substances, solid, n.o.s., Hazard class: 9; Labels: 9-Miscellaneous hazardous material, Technical Name Required.

Purification Methods

Crystallise it from water at room temperature (1mL/g) by adding EtOH and cooling. [Sisler & Audrieth Inorg Synth II 180 1946.]

Incompatibilities

Strong oxidizers, potassium, potassium chlorate, sodium nitrite, metal chlorates, and hot acid solutions. Elevated temperatures cause a highly exothermic reaction with water.

Waste Disposal

Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform with EPA regulations governing storage, transportation, treatment, and waste disposal. Dilute with water, make neutral with acid or base and flush into sewer with more water.