2-Pyrrolidinone Property

Melting point:

23-25 °C (lit.)

Boiling point:

245 °C (lit.)

Density 

1.12 g/mL at 25 °C (lit.)

vapor density 

2.9 (vs air)

vapor pressure 

0.04 hPa (20 °C)

FEMA 

4829 | 2-PYRROLIDONE

refractive index 

n20/D 1.487(lit.)

Flash point:

>230 °F

storage temp. 

2-8°C

solubility 

H2O: miscible (completely)

form 

Liquid

pka

16.62±0.20(Predicted)

color 

Clear colorless to pale yellow

PH

9-11 (100g/l, H2O, 20℃)

explosive limit

1.8-16.6%(V)

Water Solubility 

miscible

Sensitive 

Hygroscopic

Merck 

14,8016

BRN 

105241

Stability:

Hygroscopic

InChIKey

HNJBEVLQSNELDL-UHFFFAOYSA-N

LogP

-0.71 at 20℃

CAS DataBase Reference

616-45-5(CAS DataBase Reference)

NIST Chemistry Reference

2-Pyrrolidinone(616-45-5)

EPA Substance Registry System

2-Pyrrolidinone (616-45-5)

Safety

Risk Statements 

22

Safety Statements 

24/25

RIDADR 

2810

WGK Germany 

1

RTECS 

UY5715000

Autoignition Temperature

395 °C

TSCA 

Yes

HazardClass 

6.1(b)

PackingGroup 

III

HS Code 

29339980

Hazardous Substances Data

616-45-5(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: > 3200 mg/kg

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H319Causes serious eye irritation

Precautionary statements

P201Obtain special instructions before use.

P202Do not handle until all safety precautions have been read and understood.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P308+P313IF exposed or concerned: Get medical advice/attention.

2-Pyrrolidinone Chemical Properties,Usage,Production

Chemical Properties

2-Pyrrolidinone occurs as a colorless or slightly grayish liquid, as white or almost white crystals, or colorless crystal needles. It has a characteristic odor. miscible with water, alcohol, ether, chloroform, benzene, ethyl acetate and carbon disulfide, insoluble in petroleum ether.

Uses

2-Pyrrolidinone is a widely used organic polar solvent for various applications. 2-Pyrrolidinone is also an intermediate in the manufacture of polymers.

Uses

2-pyrrolidone widely exists in various physiologically active natural products in nature. For example, it is the main structural unit of gonadotropin releasing hormone. At the same time, 2-pyrrolidone is an important raw material and intermediate of medicine, pesticide, dye, peptide and other chemicals. If it is used as the end chain of peptide, it also plays a stable role in the conformation of the compound. Many polysubstituted 2-pyrrolidones have been used in the synthesis and production of a variety of drugs and applied for patents.

Preparation

Pyrrolidone is prepared from butyrolactone by a Reppe process, in which acetylene is reacted with formaldehyde.

Definition

ChEBI: 2-Pyrrolidinone is the simplest member of the class of pyrrolidin-2-ones, consisting of pyrrolidine in which the hydrogens at position 2 are replaced by an oxo group. The lactam arising by the formal intramolecular condensation of the amino and carboxy groups of gamma-aminobutyric acid (GABA). It has a role as a polar solvent and a metabolite.

Production Methods

The synthesis of 2-pyrrolidone was first reported in 1889 as the product of dehydration of 4-aminobutanoic acid. It is produced commercially by condensation of butyrolactone with ammonia, a method first described in 1936. Other synthetic routes include carbon monoxide insertion into allylamine, hydrolytic hydrogenation of succinonitrile, and hydrogenation of ammoniacal solutions of maleic and succinnic acids (Hort and Anderson 1978).

Reactions

2-Pyrrolidone undergoes the reactions of a typical lactam, e.g. ring opening, attack on the carbonyl group, and replacement of hydrogens alpha to the carbonyl group. Strong acids and bases catalyze the hydrolysis of 2-pyrrolidone to 4-aminobutanoic acid (GABA). The hydrogen atom on the nitrogen atom is easily replaced by alkylation reactions with alkyl halide or sulfates, or reaction with acid anhydrides, acyl halides, ethylene oxide, and styrene. Condensation reactions with secondary amines and alcohols, and O-alkylation reactions occur at the carbonyl group. In the presence of anionic catalyst systems, 2-pyrrolidone is polymerized to polypyrrolidone, nylon-4 (Hort and Anderson 1978).

Health Hazard

Exposure to 2-pyrrolidone produces irritation to the eyes, mucous membranes, and skin. Although reported to be a skin sensitizer in animal tests, there is no indication that 2-pyrrolidone is a skin sensitizer in human exposures (Anon 1975). 2-Pyrrolidone has been reported to enhance the permeability of human skin for methanol, but reduced the permeability for octanol (Southwell et al 1983).

Flammability and Explosibility

Non flammable

Pharmaceutical Applications

Pyrrolidone and N-methylpyrrolidone are mainly used as solvents in veterinary injections. Pyrrolidone has been shown to be a better solubilizer than glycerin, propylene glycol, or ethanol. They have also been suggested for use in human pharmaceutical formulations as solvents in parenteral, oral, and topical applications. In topical applications, pyrrolidones appear to be effective penetration enhancers. Pyrrolidones have also been investigated for their application in controlled-release depot formulations.

Industrial uses

2-Pyrrolidone is used as an intermediate for synthesis of l-vinyl-2-pyrrolidone and various TV-methylol derivatives used as textile-finishing agents; as a solvent for various polymers, chlordane and DDT, d-sorbitol, glycerin, and sugars; and as a decolorizing agent for kerosene, fatty oils, and rosins. N-methyl-2-pyrrolidone and 2-pyrrolidone are utilized in petroleum refining to selectively extract aromatics from paraffinic hydrocarbons. 2-Pyrrolidone is used as a plasticizer and coalescing agent for acrylic latices and acrylic/styrene copolymers in emulsion coatings, i.e. floor waxes. A linear high molecular weight polyamide polymer of 2-pyrrolidone, nylon-4, is used as a textile fiber, injection molding compound, and film-forming polymer (Anon. 1975; Hort and Anderson 1978).

Safety

Pyrrolidones are mainly used in veterinary injections and have also been suggested for use in human oral, topical, and parenteral pharmaceutical formulations. In mammalian species, pyrrolidones are biotransformed to polar metabolites that are excreted via the urine. Pyrrolidone is mildly toxic by ingestion and subcutaneous routes; mutagenicity data have been reported.
LD50 (guinea pig, oral): 6.5 g/kg
LD50 (rat, oral): 6.5 g/kg

Metabolism

A metabolite of 2-pyrrolidone, 4-aminobutanoic acid has been identified in animals (Lundgren et al 1980). 2-Pyrrolidone has been reported to be an endogenous constituent in the brains of mice (Callery et al 1978) and bovine (Mori et al 1975). The aliphatic polyamine putrescine has been demonstrated to be metabolized to 2-pyrrolidone in rat liver slices (Lundgren and Hankins 1978; Lundgren et al 1985) and to lesser extent by slices of spleen and lung, but not in tissue slices from kidney, brain, heart, or rear leg muscle (Lundgren and Hankins 1978). The metabolism of putrescine is catalyzed by the microsomal enzyme diamine oxidase (EC 1.4.3.6) to 4-aminobutyraldehyde, which is subsequently oxidized to the neurotransmitter 4-aminobutanoic acid (4-aminobutyric acid, GAB A) or is cyclized to delta1-pyrroline (Seiler 1980; Lundgren et al 1980; Callery et al 1980), which is in turn oxidized to 5-hydroxy-2-pyrrolidone (Lundgren and Fales 1980). There is evidence that 5-hydroxy-2-pyrrolidone is further metabolized to succinimide, malimide, 2- and 3-hydroxysuccinamic acids, maleamic acid, and carbon dioxide (Bandle et al 1984). An enzyme system residing in the soluble fraction of rabbit liver catalyzes the conversion of delta'-pyrroline to ?-aminobutyric acid and its lactam, 2-pyrrolidone (Callery et al 1982). 2-Pyrrolidone has been identified as a urinary metabolite of N-nitrosopyrrolidine (Cottrell et al 1980) and the drug methadone (Kreek 1980).

storage

Pyrrolidone is chemically stable and, if it is kept in unopened original containers, the shelf-life is approximately one year. Pyrrolidone should be stored in a well-closed container protected from light and oxidation, at temperatures below 20°C.

Incompatibilities

Pyrrolidone is incompatible with oxidizing agents and strong acids.