CARBONYL SULFIDE Property

Melting point:

−138 °C(lit.)

Boiling point:

−50 °C(lit.)

Density 

1.274; 2.4849

vapor density 

2.1 (20 °C, vs air)

vapor pressure 

9034 mm Hg ( 21 °C)

refractive index 

n 1.3785

solubility 

soluble in H2O, ethanol

form 

gas

color 

colorless

Odor Threshold

0.055ppm

explosive limit

11.9-29%

Water Solubility 

mL/100mL H2O: 133.3 (0°C), 56.1 (20°C), 40.3 (30°C) [LAN05]; slowly decomposes in H2O [COT88]; soluble alcohol [HAW93]

Stability:

Stable. Corrosive to common metals when moisture is present. Reacts vigorously with oxidants. Flammable. Suck-back into cylinder may cause rupture.

InChIKey

JJWKPURADFRFRB-UHFFFAOYSA-N

EPA Substance Registry System

Carbonyl sulfide (463-58-1)

Safety

Hazard Codes 

F,Xn

Risk Statements 

11-20-36/37/38

Safety Statements 

16-26-38

RIDADR 

UN 2204 2.3

WGK Germany 

3

RTECS 

FG6400000

HazardClass 

2.3

Hazardous Substances Data

463-58-1(Hazardous Substances Data)

Toxicity

LD50 i.p. in rats: 22.5 mg/kg; LC50 by inhalation (mg/m3): 2940 in mice (35 min); 2650 in rats (4 h) (Bartholomaeus, Haritos)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H221Flammable gas

H280Contains gas under pressure; may explode if heated

H315Causes skin irritation

H319Causes serious eye irritation

H330Fatal if inhaled

H335May cause respiratory irritation

Precautionary statements

P210Keep away from heat/sparks/open flames/hot surfaces. — No smoking.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P410+P403Protect from sunlight. Store in a well-ventilated place.

CARBONYL SULFIDE Chemical Properties,Usage,Production

Description

Carbonyl oxysulfide is a colorless gas or coldliquid. Molecular weight=60.07. Boiling point=250℃.Flammable limits: LEL=12%; UEL=29%. HazardIdentification (based on NFPA-704 M Rating System):Health 3, Flammability 4, Reactivity 1.

Chemical Properties

Carbonyl sulfide is a colorless gas or cold liquid.

Chemical Properties

colourless gas with an unpleasant smell; cylinder

Occurrence

Carbonyl sulfide, COS, is now recognized as a component of the atmosphere at a tropospheric concentration of approximately 500 parts per trillion by volume, corresponding to a global burden of about 2.4 million tons. It is, therefore, a significant sulfur species in the atmosphere. It is possible that the HO• radicalinitiated oxidation of COS and carbon disulfide (CS2) would yield 8-12 million tons as S in atmospheric sulfur dioxide per year. Though this is a small yield compared to pollution sources, the HO•-initiated process could account for much of the SO2 burden in the remote troposphere.
Both COS and CS2 are oxidized in the atmosphere by reactions initiated by the hydroxyl radical. The initial reactions are
HO• + COS ® CO2 + HS• (11.10.1)
HO• + CS2 ® COS + HS• (11.10.2)
These reactions with hydroxyl radical initiate oxidation processes that occur through a series of atmospheric chemical reactions. The sulfur-containing products that are initially formed as shown by Reactions 11.10.1 and 11.10.2 undergo further reactions to sulfur dioxide and, eventually, to sulfate species.

Uses

Carbonyl sulfide (COS) is a colorless, odorless (when pure) relatively stable gas with a boiling point of -50°C.
There are limited commercial uses of COS. It is produced only in small quantities and used for small-scale experimental purposes and as an intermediate in the synthesis of organic sulfur compounds, thiocarbamate herbicides, and alkyl carbonates. Pesticide manufacturers are believed to be the largest users of COS. Similar to CS2, research conducted by the Stored Grain Research Laboratory at the Australia’s Commonwealth Scientific and Industrial Research Organisation (CSIRO) has shown COS to be an effective soil and grain fumigant for controlling insects on crops such as wheat, barley, oats, and peas, although it is not currently approved for this commercial use.
The use of COS as a fumigant for durable commodities and structures was patented worldwide in 1992 by CSIRO Australia. COS has the potential to replace methyl bromide, being phased out due to its ozone depletion properties, in several of its applications for durable commodities and also to be used as an alternative to phosphine when there is a significant problem with insect resistance.

Uses

carbonyl sulfide is use as a fumigant for durable commodities and structures was patented worldwide by Australia in 1992. It is effective on a wide range of pests, including the common stored product species at reasonable concentrations (less than 50 gm-3) and exposure times (1-5 days) . However, the egg stage of several insects showed tolerance to the fumigant. The other problems associated with the use of carbonyl sulfide include its high tainting odour on the treated products and reduction in the germination of seeds. Hydrogen sulphide, an impurity, present in fumigant product supply was reported to be responsible for the off-odour problem. Selective removal of hydrogen sulphide using absorbents like tertiary amine may solve the tainting issues with this fumigant.

Uses

Grain fumigant.

Definition

ChEBI: A one-carbon compound in which the carbon atom is attached to an oxygen and a sulfur atom via double bonds.

General Description

CARBONYL SULFIDE is a colorless, poisonous, flammable gas with a distinct sulfide odor. The gas is toxic and narcotic in low concentrations and presents a moderate fire hazard. Under prolonged exposure to fire or intense heat the container may rupture violently or rocket. CARBONYL SULFIDE is used in the synthesis of organic thio compounds.

Air & Water Reactions

Highly flammable.

Reactivity Profile

CARBONYL SULFIDE is expected to react with vigor with strong oxidants.

Hazard

Narcotic in high concentrations. Flammable, explosive limits in air 12–28.5%. Central nervous system impairment.

Health Hazard

TOXIC; may be fatal if inhaled or absorbed through skin. Contact with gas or liquefied gas may cause burns, severe injury and/or frostbite. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control may cause pollution.

Fire Hazard

Flammable; may be ignited by heat, sparks or flames. May form explosive mixtures with air. Vapors from liquefied gas are initially heavier than air and spread along ground. Vapors may travel to source of ignition and flash back. Some of these materials may react violently with water. Cylinders exposed to fire may vent and release toxic and flammable gas through pressure relief devices. Containers may explode when heated. Ruptured cylinders may rocket. Runoff may create fire or explosion hazard.

Safety Profile

Poison by intraperitoneal route. Mildly toxic by inhalation. Narcotic in high concentration. An irritant. May liberate highly toxic hydrogen sulfide upon decomposition. A very dangerous fire hazard and moderate explosion hazard when exposed to heat or flame. Can react vigorously with oxidizing materials. To fight fire, stop flow of gas or use CO2, dry chemical, or water spray. When heated to decomposition it emits toxic fumes of CO. See also CARBONYLS and SULFIDES.

Potential Exposure

Carbon oxysulfide is an excellent source of usable atomic sulfur, therefore, it can be used in various chemical syntheses, such as the production of episulfides, alkenylthiols, and vinylicthiols. It is also used to make viscose rayon. It is probable that the largest source of carbon oxysulfide is as a by-product from various organic syntheses and petrochemical processes. Carbon oxysulfide is always formed when carbon, oxygen, and sulfur, or their compounds, such as carbon monoxide; carbon disulfide, and sulfur dioxide, are brought together at high temperatures. Hence, carbon, oxysulfide is formed as an impurity in various types of manufactured gases and as a by-product in the manufacture of carbon disulfide. Carbon oxysulfide is also often present in refinery gases.

First aid

Gas: Move victim to fresh air. Call emergencymedical care. Apply artificial respiration if victim is notbreathing. Do not use mouth-to-mouth method if victimingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-wayvalve or other proper respiratory medical device.Administer oxygen if breathing is difficult. Remove andisolate contaminated clothing and shoes. In case of contactwith substance, immediately flush skin or eyes with runningwater for at least 20 min. In case of contact with liquefiedgas, thaw frosted parts with lukewarm water. Keep victimwarm and quiet. Keep victim under observation. Effects ofcontact or inhalation may be delayed. Ensure that medicalpersonnel are aware of the material(s) involved and takeprecautions to protect themselves.
Refrigerated liquid: Move victims to fresh air. Call emergency medical care. Apply artificial respiration if victim isnot breathing. Administer oxygen if breathing is difficult.Remove and isolate contaminated clothing and shoes. Incase of contact with substance, immediately flush skin oreyes with running water for at least 20 min. In case of contact with liquefied gas, thaw frosted parts with lukewarmwater. Keep victim warm and quiet. Keep victim underobservation. Effects of contact or inhalation may bedelayed. Ensure that medical personnel are aware of thematerial(s) involved and take precautions to protect themselves. If frostbite has occurred, seek medical attentionimmediately; do NOT rub the affected areas or flush themwith water. In order to prevent further tissue damage, doNOT attempt to remove frozen clothing from frostbittenareas. If frostbite has NOT occurred, immediately and thoroughly wash contaminated skin with soap and water.

Environmental Fate

Toxicity from exposure to COS is likely the result of its decomposition to CO2 and H2S. H2S inhibits respiration at the cellular level, causing methemoglobinemia, which inhibits the cytochrome oxidase system, causing cytotoxic anoxia. In one study, rats treated with acetazolamide, an inhibitor of carbonic anhydrase, showed lower blood levels of H2S following exposure to COS and exhibited decreased toxicity. H2S is believed to be primarily responsible for many of the reported adverse effects associated with exposure to COS.
COS reacts readily with ammonia and primary amines to form ammonium thiocarbamate and amine salts of monothiocarbamic acid, respectively. Reaction with two primary amines may result in the formation of H2S and linking of the two amines via a carbonyl group reaction, suggesting considerable potential for protein cross-linking by COS in vivo, and this has been proposed as a mechanism to explain occupational neuropathy observed with CS2, and predicted for COS.

storage

Color Code—Red Stripe: Flammability Hazard:Store separately from all other flammable materials. Priorto working with carbon oxysulfide you should be trained onits proper handling and storage. Before entering confinedspace where this chemical may be present, check to makesure that an explosive concentration does not exist. Carbonoxysulfide must be stored to avoid contact with bases andstrong oxidizers since violent reactions occur. Keep containers in a cool, well-ventilated area away from heat,flame, and sunlight. Metal containers involving the transferof=gallons or more of liquid carbon oxysulfide should begrounded and bonded. Drums must be equipped with selfclosing valves, pressure vacuum bungs, and flame arresters.Use only nonsparking tools and equipment, especially whenopening and closing containers of COS. Sources of ignition,such as smoking and open flames, are prohibited where carbon oxysulfide is used, handled, or stored. Procedures forthe handling, use and storage of cylinders should be in compliance with OSHA 1910.101 and 1910.169, as with therecommendations of the Compressed Gas Association.

Shipping

UN2204 Carbonyl sulfide, Hazard Class: 2.3; Labels: 2.3-Poisonous gas, 2.1-Flammable gas, Inhalation Hazard Zone C. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner. Cylinders must be transported in a secure upright position, in a well-ventilated truck. Protect cylinder and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal law (49CFR) to transport and refill them. It is a violation of transportation regulations to refill compressed gas cylinders without the express written permission of the owner.

Purification Methods

Purify the gas by scrubbing it through three consecutive fritted washing flasks containing conc NaOH at 0o (to remove HCN), and then through conc H2SO4 (to remove CS2) followed by a mixture of NaN3 and NaOH solution; or passed through traps containing saturated aqueous lead acetate, then through a column of anhydrous CaSO4. Then it is freeze-pumped repeatedly and distilled through a trap packed with glass wool and cooled to -130o (using an n-pentane slurry). It liquefies at 0o/12.5mm. Use stainless steel containers. The gas is stored over conc H2SO4. [Glemser in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Academic Press Vol I p 654 1963.] TOXIC

Toxicity evaluation

Most of the releases of COS to the environment are to air, where it is believed to have a long residence time. Its half-life in the atmosphere is estimated to be approximately 2 years. It may be degraded in the atmosphere via a reaction with photochemically produced hydroxyl radicals or oxygen, direct photolysis, and other unknown processes related to the sulfur cycle. Sulfur dioxide, a greenhouse gas, is ultimately produced from these reactions. COS is relatively unreactive in the troposphere, but direct photolysis may occur in the stratosphere. Also, plants and soil microorganisms have been reported to remove COS directly from the atmosphere. Plants are not expected to store COS.
COS is extremely mobile in soils. If released to soil, it will volatilize quickly to the atmosphere (Koc= 88). It has a high solubility in water and will not readily adsorb to soil particles, sediment, or suspended organic matter. Therefore, COS is expected to volatilize rapidly from soil and water or, depending on volume, concentration, and site-specific characteristics (e.g., soil type, depth to groundwater, temperature, and humidity), maybe able to move rapidly through the ground and impact groundwater. COS may be hydrolyzed in water to form H2S and CO2.
COS is also actively taken up by some plants and converted to CS2; that is, the atmospheric pathways are reversed, and soils may act as both a net source and a net sink for COS depending on the concentration of COS and the characteristics of the soil. COS is therefore accurately described as a naturally occurring and widely distributed chemical found or produced in the air, soils, live and decomposing vegetation, and food.

Incompatibilities

Carbon oxysulfide can form explosive mixture with air. Incompatible with strong bases. Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides.

Waste Disposal

Return refillable compressed gas cylinders to supplier. Dissolve in a combustible solvent, such as alcohol, benzene, etc. Burn in a furnace with afterburner and scrubber to remove SO2 .