Levobupivacaine Property

Melting point:

136-137°C

alpha 

D25 -80.9° (c = 5 in methanol)

Boiling point:

430.65°C (rough estimate)

Density 

1.0238 (rough estimate)

refractive index 

1.5700 (estimate)

storage temp. 

Refrigerator

solubility 

DMSO:58.0(Max Conc. mg/mL);201.09(Max Conc. mM)
Ethanol:58.0(Max Conc. mg/mL);201.09(Max Conc. mM)

pka

14.85±0.70(Predicted)

form 

Solid

color 

White to Off-White

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H301Toxic if swalloed

H311Toxic in contact with skin

H330Fatal if inhaled

Precautionary statements

P260Do not breathe dust/fume/gas/mist/vapours/spray.

P264Wash hands thoroughly after handling.

P264Wash skin thouroughly after handling.

P270Do not eat, drink or smoke when using this product.

P271Use only outdoors or in a well-ventilated area.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P284Wear respiratory protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P302+P352IF ON SKIN: wash with plenty of soap and water.

P304+P340IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.

P310Immediately call a POISON CENTER or doctor/physician.

P312Call a POISON CENTER or doctor/physician if you feel unwell.

P320Specific treatment is urgent (see … on this label).

P321Specific treatment (see … on this label).

P322Specific measures (see …on this label).

P330Rinse mouth.

P361Remove/Take off immediately all contaminated clothing.

P363Wash contaminated clothing before reuse.

P403+P233Store in a well-ventilated place. Keep container tightly closed.

P405Store locked up.

P501Dispose of contents/container to..…

Levobupivacaine Chemical Properties,Usage,Production

Chemical Properties

White Solid

Originator

Chirocaine,Abbott Laboratories

Uses

Local anaesthetic used for epidural and intrathecal anaesthesia.

Definition

ChEBI: Levobupivacaine is the (S)-(-)-enantiomer of bupivacaine. It has a role as a local anaesthetic, an adrenergic antagonist, an amphiphile, an EC 3.1.1.8 (cholinesterase) inhibitor and an EC 3.6.3.8 (Ca(2+)-transporting ATPase) inhibitor. It is a conjugate base of a levobupivacaine(1+). It is an enantiomer of a dextrobupivacaine.

Manufacturing Process

Synthesis of L-pipecolic acid 2,6-xylidide (Patent US 4,695,576)
130 g of pipecolic acid and 158.6 g of Laevo (+)-tartaric acid are dissolved under stirring in 2 L 95% ethyl alcohol and 125 ml water at 80°C. The solution is allowed to cool to room temperature and after two days the crystallized D-pipecolic-tartrate is separated. The L-pipecolic-tartrate remains in solution. The filtrate is evaporated and dissolved in 5% acetic acid. Finally the solution is treated with Amberlite IR 45* in an ion exchanger. The eluate thus obtained is evaporated and the resulting crystalline residue is dried with potassium hydroxide in vacuo. The product obtained consists of L-pipecolic acid [α]D24 = -26.2°(C = 5, H2O).
4 g of phosphorus pentachloride was added to a suspension of 4 g of Lpipecolic acid hydrochloride in 40 ml acetylchloride. The initial reaction is effected at a temperature of about 35°C under stirring for 2 hours. The chlorination is completed by adding during a time period of about 10 minutes an additional two grams of phosphorus pentachloride and stirring over a further period of 4 hours while maintaining the suspension at a temperature of about 35°C. The resulting L-pipecolic acid chloride hydrochloride is filtered and washed with toluene and acetone. The crystalline residue is then dried in vacuo, m.p. 155°C.
A mixture of 2.7 ml 2,6-dimethylaniline, 4 ml acetone, and 4 ml Nmethylpyrrolidone is gradually added under stirring for 2 hours at 70°C to a suspension of 4 g of L-pipecolic acid chloride hydrochloride. This yields a crystalline product, which is filtered, washed with acetone and dried. This crystalline product is then dissolved in water and the base is precipitated by the addition of ammonia. The base is then extracted by the use of toluene and is recovered by evaporation. The base is recrystallized from a mixture of hexane and ethanol to yield L-pipecolic acid 2,6-xylidide. The melting point of this compound is 129-130°C.
Preparation of L-N-n-butylpipecilic acid 2,6-xylidide may de carried out by analogy with the preparation of L-N-n-propylpipecolic acid 2,6-xylidide (Patent US 5,777,124).
n-Butylbromide and potassium carbonate are added to a solution of L-pipecolic acid 2,6-xylidide dissolved in isopropyl alcohol. Thereafter, 5 ml of water is added to the mixture and the reaction is carried out for 4 hours at 72°C.
To complete the reaction, a further 0.8 ml n-butylbromide are added under continuous stirring and heating for 4 hours. The residue is treated with a mixture of 250 ml toluene and an equal amount of water at 50°C. The toluene layer is separated and washed three times with 100 ml warm water (40°C). A 175 ml portion of the toluene is removed by evaporation and the remainder is stored at +5°C for 6 hours to achieve crude crystalline L-N-n-butylpipecilic acid 2,6-xylidide. The crystalline product is separated by filtration, washed with some cooled toluene and dried at 70°C. Recrystallization may be carried from toluene. This product is dissolved in 100 ml ethanol and neutralized with concentrated hydrochloric acid. Ethanol is removed by evaporation and the hydrochloride product obtained is vacuum dried. Finally the latter is recrystallized from isopropyl alcohol.

Therapeutic Function

Local anesthetic

General Description

Levobupivacaine is the pure “S” enantiomer of bupivacaineand in vivo and in vitro studies confirm that it does notundergo metabolic inversion to R(+) bupivacaine. The pKaof the tertiary nitrogen is 8.09, the same as bupivacaine’s pKa. Levobupivacaine is available in solution for epiduraladministration, peripheral nerve block administration, andinfiltration anesthesia. Clinical trials have shown thatlevobupivacaine and bupivacaine have similar anestheticeffects. Levobupivacaine has lower CNS and cardiotoxicitythan bupivacaine although unintended intravenousinjection when performing nerve blocks may result intoxicity. Racemic bupivacaine is metabolized extensivelywith no unchanged drug found in the urine or feces. Liverenzymes including the CYP3A4 and CYP1A2 isoforms areresponsible for N-dealkylation and 3-hydroxylation oflevobupivacaine followed by glucuronidation or sulfation.

Pharmacology

This is the laevo (S–) enantiomer of bupivacaine, with similar properties to the racemic mixture, though it has slightly higher protein binding and clearance and hence a lower potential for cardiac and CNS toxicity. In practice, several other factors contribute to local anaesthetic toxicity, and the recommended maximum doses remain the same. Its formulation is expressed as percentage weight per unit volume of free base; racemic bupivacaine is expressed as percentage weight per unit volume of hydrochloride salt. Levobupivacaine therefore contains 13% more active molecules for a given dose.