Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride
- Product Name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride
- CAS No.
- 16090-14-5
- Chemical Name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride
- Synonyms
- PSVE;PERFLUORO(4-METHYL-3,6-DIOXAOCT-7-ENE)SULPHONYL FLUORIDE;FS 141;Perfluoro(sulfonylvinyl)ether;Perfluoro(4-methyl-3,6-dioxaoc;2,2-tetrafluoro-etrafluoroethoxy]-1;PERFLUORO-2-(2-FLUOROSULPHONYLETHOXY)PROPYLVINYLETHER;PERFLUORO-2-(2-FLUOROSULFONYLETHOXY)PROPYL VINYL ETHER;PERFLUORO(4-METHYL-3,6-DIOXAOCT-7-ENE)SULFONYL FLUORIDE;Perfluoro-3,6-dioxa-4-methyloct-7-enesulphonyl fluoride
- CBNumber
- CB9191460
- Molecular Formula
- C7F14O4S
- Formula Weight
- 446.12
- MOL File
- 16090-14-5.mol
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride Property
- Boiling point:
- 135°C
- Density
- 1,7 g/cm3
- storage temp.
- Refrigerator, under inert atmosphere
- solubility
- Chloroform (Slightly), Methanol (Slightly)
- form
- Oil
- color
- Colourless
- EPA Substance Registry System
- Ethanesulfonyl fluoride, 2-[1-[difluoro[(trifluoroethenyl)oxy]methyl]-1,2,2,2-tetrafluoroethoxy]-1,1,2,2-tetrafluoro- (16090-14-5)
Safety
- Hazard Codes
- Xi
- Risk Statements
- 36/37/38
- Safety Statements
- 26-36/37/39
- RIDADR
- 2810
- Hazard Note
- Irritant
- TSCA
- T
- HazardClass
- TOXIC
- HS Code
- 2930909899
- Toxicity
- LD50 skin in rabbit: > 17gm/kg
Hazard and Precautionary Statements (GHS)
- Symbol(GHS)
-
- Signal word
- Warning
- Hazard statements
-
H315Causes skin irritation
H319Causes serious eye irritation
H335May cause respiratory irritation
- Precautionary statements
-
P261Avoid breathing dust/fume/gas/mist/vapours/spray.
P271Use only outdoors or in a well-ventilated area.
P280Wear protective gloves/protective clothing/eye protection/face protection.
N-Bromosuccinimide Price
- Product number
- P286545
- Product name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonylFluoride
- Packaging
- 1g
- Price
- $80
- Updated
- 2021/12/16
- Product number
- 6362-2-01
- Product name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride
- Purity
- 97%
- Packaging
- 5G
- Price
- $105
- Updated
- 2021/12/16
- Product number
- 001082
- Product name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)-sulfonyl fluoride
- Purity
- 95%
- Packaging
- 5g
- Price
- $140
- Updated
- 2021/12/16
- Product number
- PC7831
- Product name
- Perfluoro-3,6-dioxa-4-methyloct-7-enesulphonylfluoride
- Packaging
- 5g
- Price
- $205
- Updated
- 2021/12/16
- Product number
- 6362-2-01
- Product name
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride
- Purity
- 97%
- Packaging
- 25g
- Price
- $425
- Updated
- 2021/12/16
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride Chemical Properties,Usage,Production
Uses
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride can be used as organic synthesis intermediates and pharmaceutical intermediates, mainly used in laboratory research and development processes and chemical production processes.
Uses
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl Fluoride is used as a reagent in the synthesis of novel perfluorinated vinyl ether containing sulfonimide functionality which can be copolymered with tetrafluoroethylene to yield a novel perfluorinated copolymer.
Synthesis
(1) Intermediate synthesis In a 1L reactor, add 100ml of dimethylacetamide, 8g of potassium fluoride, and 200g (1.11mol) of tetrafluoroethane-|?-sultone,Subsequently, 500g (3mol) of hexafluoropropylene oxide was introduced at a flow rate of 0.3kg/h for addition reaction, and the reaction temperature was controlled at 20??C.The reaction pressure is controlled at 0.4MPa. After the introduction of hexafluoropropylene oxide is completed, the reaction is continued for 1 hour. After the reaction is completed,The reaction liquid was rectified to obtain 528g (1.03mol) of intermediate, with a yield of 92% and a purity of 99.1%;(2) PSVE synthesis In a moving bed reactor (volume 2L, material 316L, produced by Tianjin Qixi Technology Co., Ltd.),A mixture of 500g (0.97mol) of the intermediate obtained in step (1) and 600g of potassium carbonate (4.34mol) was passed through the salt formation zone and decarboxylation zone of the moving bed reactor in turn (the salt formation temperature was set to 150??C,The decarboxylation temperature is set to 360??C) to carry out the salt formation reaction and the decarboxylation reaction, and the contact time of the salt formation reaction is 10 min by controlling the material feed rate.The contact time of the decarboxylation reaction is 25min, and the decarboxylation reaction product is collected by condensation to obtain a crude product.The crude product is rectified to obtain the product perfluoro-3,6-dioxa-4-methyl-7-octenesulfonyl fluoride with a purity of 98.5% and a yield of 85%.
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride Preparation Products And Raw materials
Raw materials
Preparation Products
Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride Suppliers
- Tel
- 021-6125035 18019281355
- vlchemjh@126.com
- Country
- China
- ProdList
- 302
- Advantage
- 58
- Tel
- 021-65170832 17301729617
- qinba_2@163.com
- Country
- China
- ProdList
- 270
- Advantage
- 58
- Tel
- 010-82848833 400-666-7788
- Fax
- 86-10-82849933
- jkinfo@jkchemical.com
- Country
- China
- ProdList
- 96815
- Advantage
- 76
- Tel
- 010-89508211 18501085097
- Fax
- 010-89508210
- sales.bj@hwrkchemical.com
- Country
- China
- ProdList
- 8418
- Advantage
- 55
- Tel
- 571-89189769 15168342188
- Fax
- 0571-86205065
- Country
- China
- ProdList
- 253
- Advantage
- 62
- Tel
- 021-68712331 39130253
- Fax
- 18621350903
- aokchem@gmail.com
- Country
- China
- ProdList
- 332
- Advantage
- 58
- Tel
- +91-22-26355700
- Fax
- +91-22-26355701
- info@clearsynth.com
- Country
- India
- ProdList
- 9679
- Advantage
- 58
- Tel
- 021-54359730 400-008-9730
- Fax
- 021-54353864
- info@chemxyz.com
- Country
- China
- ProdList
- 3991
- Advantage
- 60
- Tel
- 0371-53732842 15981811963
- Fax
- 0371-86239377
- 1758257485@qq.com
- Country
- China
- ProdList
- 950
- Advantage
- 56
- Tel
- 027-87465837 19945049750
- Fax
- 027-8777-2287
- sales@finetechnology-ind.com
- Country
- China
- ProdList
- 9648
- Advantage
- 58
View Lastest Price from Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride manufacturers
- Product
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride 16090-14-5
- Price
- US $10.00-7.00/kg
- Min. Order
- 1kg
- Purity
- 99.99%
- Supply Ability
- 10 tons
- Release date
- 2024-06-13
- Product
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride 16090-14-5
- Price
- US $44.00-207.00/g
- Min. Order
- 5g
- Purity
- 0.99
- Supply Ability
- 25kg
- Release date
- 2023-12-07
- Product
- Perfluoro(4-methyl-3,6-dioxaoct-7-ene)sulfonyl fluoride 16090-14-5
- Price
- US $5.00-0.50/KG
- Min. Order
- 1KG
- Purity
- 99%
- Supply Ability
- g-kg-tons, free sample is available
- Release date
- 2024-01-13