4,6-Dinitro-2-sec-butylphenol Property

Melting point:

55.5°C

Boiling point:

382.92°C (rough estimate)

Density 

1.29

vapor pressure 

0.01Pa at 25℃

refractive index 

1.6620 (estimate)

Flash point:

>100 °C

storage temp. 

2-8°C

solubility 

Chloroform (Slightly), Methanol (Slightly)

pka

4.62(at 25℃)

Specific Gravity

1

Water Solubility 

0.0052 g/100 mL

Merck 

13,3317

Stability:

Stable. Strong oxidizing agent. Incompatible with reducing agents, combustible material.

LogP

1.26 at 22℃

CAS DataBase Reference

88-85-7(CAS DataBase Reference)

NIST Chemistry Reference

2-Sec-butyl-4,6-dinitrophenol(88-85-7)

EPA Substance Registry System

Dinoseb (88-85-7)

Safety

Hazard Codes 

T;N,N,T,Xn

Risk Statements 

24/25-44-50/53-61-62-36-63-43-36/37/38-23/24/25-45-67-40-41-38

Safety Statements 

45-53-60-61-36/37-24/25-23-26-36/37/39

RIDADR 

UN 2810

WGK Germany 

3

RTECS 

SJ9800000

HazardClass 

6.1(a)

PackingGroup 

II

Hazardous Substances Data

88-85-7(Hazardous Substances Data)

Toxicity

LD50 in adult male, female rats (mg/kg): 27, 28 orally (Gaines, Linder)

Hazard and Precautionary Statements (GHS)

Symbol(GHS)

Signal word

Danger

Hazard statements

H300Fatal if swallowed

H311Toxic in contact with skin

H315Causes skin irritation

H317May cause an allergic skin reaction

H318Causes serious eye damage

H360May damage fertility or the unborn child

H410Very toxic to aquatic life with long lasting effects

Precautionary statements

P201Obtain special instructions before use.

P273Avoid release to the environment.

P280Wear protective gloves/protective clothing/eye protection/face protection.

P301+P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.

4,6-Dinitro-2-sec-butylphenol Chemical Properties,Usage,Production

Description

Dinoseb, also known as dinitrophenol, can adversely affect the energy generating reaction in a cell. No cell will live very long under the influence of high concentrations of dinitrophenol. It makes the body burn enough energy to result in weight loss. During the 1930s, physicians unwittingly prescribed certain types of dinitrophenol as diet pills.
Dow Chemical changed the basic structure of dinitrophenol slightly to produce dinoseb, which was marketed in 1948. Dinoseb was widely used as a contact herbicide against broadleaf weeds.
Dinoseb causes toxicity the same way in plants, animals, and fungi because all cells contain very similar biochemical pathways for creating energy from the breakdown of sugars. Furthermore, photosynthesis in plants relies on an energy transfer system that is also inhibited by dinitrophenol.
Given the high toxicity, EPA concluded that the doses causing the birth defects and the endocrine-disrupting effects were close to worker exposure levels. Thus, under an emergency order issued in 1986, EPA suspended dinoseb’s registration. In August 1990, the EPA banned the burying of dinoseb-contaminated soils in EPA-approved landfills, making incineration the only EPA-approved disposal method for dinoseb-contaminated soil. Incineration is expensive and incomplete, leaving a noncombustible residue as a further hazardous waste and some combustion products that could remain toxic. Therefore, an ex situ soil bioremediation process was developed by the Sabre Processing company. This process is known as the SABRE process; it uses an anaerobic consortium and supplemental carbon source at the field scale to successfully remediate contaminated soils.

Chemical Properties

solid

Uses

The amine, ammonium salt or acetate ester is used as a contact herbicide for postemergence weed control in cereals, cotton, peas, beans, potatoes, pumpkins, soybeans and strawberries.

Uses

Dinoseb is used as an herbicide andinsecticide.

Uses

Dinoseb is used as an herbicide, corn yield enhancer, insecticide, and miticide. It is used as a herbicide in soybeans, a variety of vegetables, fruits, nuts, citrus trees, and with other field crops for control of grasses and broadleaf weeds. It is used as an insecticide in grapes.

Definition

ChEBI: 2-(butan-2-yl)-4,6-dinitrophenol is a dinitrophenol that is 2,4-dinitrophenol substituted by a butan-2-yl group at position 2.

General Description

Orange-brown viscous liquid or orange-brown solid. Orange crystals when pure. Has a pungent odor. Used as a plant growth regulator; insecticide and herbicide.

Reactivity Profile

4,6-Dinitro-2-sec-butylphenol is a powerful oxidizing agent. . 4,6-Dinitro-2-sec-butylphenol is dangerously explosive. When not water wet 4,6-Dinitro-2-sec-butylphenol is a high explosive. Dry, the material is easily ignited and 4,6-Dinitro-2-sec-butylphenol will burn very vigorously. On decomposition, nitro compounds such as this emit toxic fumes. Appear to be stable in acid solution, but are susceptible to decomposition by ultraviolet radiation in alkaline solution. [EPA, 1998].

Health Hazard

Extremely toxic: Probable oral lethal dose is 5-50 mg/kg; between 7 drops and 1 teaspoonful for 70 kg person (150 lb.).

Health Hazard

Dinoseb is a highly toxic compound. Theoral LD50 values in small laboratory animals were between 10 and 25 mg/kg. Acutetoxicity tests on daphnids and fathead minnows showed high toxicity. The LC50 values in both these species are 0.24 and0.17 mg/L, respectively (Gersich and Mayes1986). Pregnant white rabbits treated withdinoseb exhibited maternal toxicity above thedose level of 1 mg/kg/day. At highly toxicdose levels, adverse effects were observedin developing fetuses (Johnson et al. 1988).Oral administration of dinoseb producedtumors in lung and liver in mice.

Fire Hazard

This is a dinitrophenol herbicide. (Non-Specific -- Dinitrophenol, Flammable Solid). 4,6-Dinitro-2-sec-butylphenol is dangerously explosive. When not water wet 4,6-Dinitro-2-sec-butylphenol is a high explosive. Dry, the material is easily ignited and 4,6-Dinitro-2-sec-butylphenol will burn very vigorously. On decomposition, nitro compounds such as this emit toxic fumes. Appear to be stable in acid solution, but are susceptible to decomposition by ultraviolet radiation in alkaline solution.

Flammability and Explosibility

Non flammable

Agricultural Uses

Plant growth regulator, Herbicide: Dinoseb is a phenolic herbicide used in soybeans, vegetables, fruits and nuts, citrus, and other field crops for the selective control of grass and broadleaf weeds (e.g., in corn). It is also used as an insecticide in grapes, and as a seed crop drying agent. It is produced in emuslifiable concentrates or as water-soluble ammonium or amine salts. It is no longer available in the U.S. Formerly widely used in the UK for the fumigation of potatoes; however, dinoseb acetate and dinoseb amine were banned from use in 1988. Dinoseb’s primary use is as a contact herbicide for post-emergence weed control in cereals, undersown cereals, seedling lucerne and peas. Dinoseb is also used as a corn yield enhancer and an insecticide and miticide. Banned for use in EU countries (includes salts and acetate). A U.S. EPA restricted Use Pesticide (RUP). The use of dinoseb was canceled in the U.S. in 1986 based on the potential risk of birth defects and other adverse health effects for applicators and other persons having substantial dinoseb exposure. There are 20 global suppliers.

Trade name

AATOX®; AI3-01122®; ARETIT®; BASANITE®; BNP 20®; BNP 30®; BUTAPHENE®; CALDON®; CASWELL No. 392DD®; CHEMOX®[C]; CHEMOX GENERAL®[C]; CHEMOX P. E. ®[C]; CHEMSECT DNBP®; DESICOIL®; DIBUTOX®; DINITRALL®; DINITRO®; DN 289®; DOW GENERAL®[C]; DOW GENERAL WEED KILLER®[C]; DOW SELECTIVE WEED KILLER®[C]; DYNAMYTE®[C]; DYTOP®; ELGETOL 318®; FANICIDE®; GEBUTOX®; HEL-FIRE®[C]; HIVERTOX®; HOE 26150®; IVOSIT®; KILOSEB®; KNOWX-WEED®; KNOX-WEED®; LADOB®; LASEB®; LIRO DNBP®; NITROPONE C®; PERSEVTOX®; PHENOTAN®; PREMERGE®; SINOX GENERAL®[C]; SPARIC®; SPURGE®; SUBITEX®; UNICROP DNBP®; VERTAC DINITRO WEED KILLER®[C]; VERTAC GENERAL WEED KILLER®[C]; VERTAC SELECTIVE WEED KILLER®[C]

Potential Exposure

AgriculturalChemical; Tumorigen, Mutagen; Reproductive Effector;Primary Irritant. This material is used for herbicide formulation; as a plant growth regulator, insecticide, and herbicide. Dinoseb is primarily used as a contact herbicide forpostemergence weed control in cereals, undersown cereals,seedling lucerne and peas. Dinoseb is also used as a cornyield enhancer and an insecticide and miticide.[US EPA]

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for atleast 15 min, occasionally lifting upper and lower lids.Seek medical attention immediately. If this chemical contacts the skin, remove contaminated clothing and washimmediately with soap and water. Seek medical attentionimmediately. If this chemical has been inhaled, removefrom exposure, begin rescue breathing (using universalprecautions, including resuscitation mask) if breathing hasstopped and CPR if heart action has stopped. Transferpromptly to a medical facility. When this chemical hasbeen swallowed, get medical attention. Give largequantities of water and induce vomiting. Do not make anunconscious person vomit. Consult poison center on useof antidotes

Environmental Fate

Biological. When 14C-labeled dinoseb (5 ppm) was incubated in soil at 25°C for 60 days, 36.0% of the applied amount degraded to 14CO2 (Doyle et al., 1978). Thom and Agg (1975) reported that dinoseb is unlikely to be degraded in conventional sewage treatment processes.
Groundwater. According to the U.S. EPA (1986) dinoseb has a high potential to leach to groundwater.
Plant. When dinoseb on bean leaves was exposed to sunlight, photodegradation resulted in the formation of persistent, polar compounds. The compounds could not be identified by TLC (Matsuo and Casida, 1970).
Chemical/Physical. Reacts with organic and inorganic bases forming water-soluble salts (Worthing and Hance, 1991).
Emits toxic fumes of chlorine when heated to decomposition (Sax and Lewis, 1987).

storage

Color Code—Blue: Health Hazard/Poison: Store ina secure poison location. Prior to working with dinoseb youshould be trained on its proper handling and storage. Store intightly closed containers in a cool, well-ventilated area

Shipping

Dinoseb and dinoseb acetate are toxic pesticideand should be labeled “SUBSTITUTED NITROPHENOLPESTICIDES, SOLID (or LIQUID), TOXIC.” They fallinto DOT/UN Hazard Class 6.1(b) and Packing Group III.

Toxicity evaluation

Dinoseb does not ordinarily persist in the soil, but in storage areas or locations where it has been spilled, it persists as a soil and groundwater contaminant. Additionally, release of dinoseb may result primarily from its use as an herbicide on a variety of weeds. Release of dinoseb to soil is expected to result in biodegradation, and dinoseb only weakly adsorbs to soils and therefore leaches to groundwater. However, it may bind more strongly to clay soils, especially at acidic pH. Photolytic degradation of dinoseb from soil surface may be important. Volatilization is not expected to be significant. In the absence of volatilization, the half-life of dinoseb in the sandy loam soil was estimated to be about 100 days. Dinoseb may photodegrade in surface water with a half-life of 14–18 days. Hydrolysis in water may not be important. It is unlikely to undergo significant biodegradation in most natural waters. Volatilization from water is expected to be slow and bioconcentration is expected to be insignificant. Based on its vapor pressure of 8.5 × 10-2mmHg at 20 ℃, dinoseb may exist entirely in the vapor phase in the atmosphere. The half-life for the reaction of vapor phase dinoseb with photochemically generated hydroxyl radicals in the atmosphere was estimated to be 14.1 days. Wet deposition may remove some of the compound from air.

Incompatibilities

The solution in water is a weak acid.Attacks many metals in the presence of water.