Ethyl 1H-1,2,3-triazole-5-carboxylate
Ethyl 1H-1,2,3-triazole-5-carboxylate Basic information
- Product Name:
- Ethyl 1H-1,2,3-triazole-5-carboxylate
- Synonyms:
-
- 3H-[1,2,3]TRIAZOLE-4-CARBOXYLIC ACID ETHYL ESTER
- 1H-1,2,3-TRIAZOLE-4-CARBOXYLIC ACID, ETHYL ESTER
- 1H-1,2,3-Triazole-4-carboxylicacid,ethylester(9CI)
- Ethyl 1H-1,2,3-triazole-5-carboxylate
- 1H-1,2,3-Triazole-5-carboxylic acid, ethyl ester
- ethyl 1H-1,2,3-triazole-4-carboxylate
- ethyl 2H-triazole-4-carboxylate
- CAS:
- 40594-98-7
- MF:
- C5H7N3O2
- MW:
- 141.13
- Product Categories:
-
- CARBOXYLICESTER
- Mol File:
- 40594-98-7.mol
Ethyl 1H-1,2,3-triazole-5-carboxylate Chemical Properties
- Melting point:
- 102-104 °C
- Boiling point:
- 284.7±13.0 °C(Predicted)
- Density
- 1.299±0.06 g/cm3(Predicted)
- storage temp.
- under inert gas (nitrogen or Argon) at 2-8°C
- pka
- 6.94±0.70(Predicted)
- Appearance
- White to off-white Solid
Ethyl 1H-1,2,3-triazole-5-carboxylate Usage And Synthesis
Uses
1H-1,2,3-Triazole-5-carboxylic Acid Ethyl Ester is used in the synthesis potent inhibitors of bacterial β-lactamase.
Synthesis
4648-54-8
623-47-2
40594-98-7
Ethyl propargylate and trimethylmethylsilyl azide were injected through a 2 mL loop in a Vapourtec R2+/R4 flow system equipped with three PTFE reactor coils (10 mL) and a 250 psi back pressure regulator. The flow rate was set at 0.5 mL/min and the residence time was 1.5 hours. The system was heated to 140°C. Injections were performed every 40 min and the solvent used was acetonitrile. The total mixture flowing from the reactor was collected and a total of 5 injections were performed. The collected mixtures were combined and the acetonitrile was removed under vacuum by rotary evaporator (the collection flask of the rotary evaporator was pre-filled with saturated aqueous NaHCO3 solution to quench any HN3 that might be generated). The residual solid was dissolved in ethyl acetate and the organic phase was washed with saturated brine (3 times), dried over anhydrous sodium sulfate, filtered and the solvent evaporated. The crude product was stirred with a minimal amount of ether, filtered and dried to give ethyl 1H-1,2,3-triazole-5-carboxylate (8.65 g, 81% yield) as a white solid. Mass spectrum (ESI): m/z=142.1 [M+H]+.
References
[1] Journal of Heterocyclic Chemistry, 2009, vol. 46, # 1, p. 131 - 133
[2] Patent: WO2017/89389, 2017, A1. Location in patent: Page/Page column 35
Ethyl 1H-1,2,3-triazole-5-carboxylateSupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 0757-86329057 18934348241
- sales4.gd@hwrkchemical.com
- Tel
- 18986259541
- sales@3stc.com
- Tel
- 021-37910092; 15821801668
- cong44@126.com
- Tel
- +86057186818502 13588463833
- info@sagechem.com
Ethyl 1H-1,2,3-triazole-5-carboxylate(40594-98-7)Related Product Information
- 1,2,3-1H-Triazole
- RESMETHRIN
- Ethyl formate
- Benzocaine
- Urethane
- Methyl acrylate
- Ethanol
- Ethyl cyanoacetate
- Ethylparaben
- ISOXADIFEN-ETHYL
- Ethyl acetate
- Ethyl acrylate
- Tris(trimethylsilyl)phosphate
- Ethyl chloroformate
- ETHYL 1-(4-AMINO-1,2,5-OXADIAZOL-3-YL)-5-METHYL-1H-1,2,3-TRIAZOLE-4-CARBOXYLATE
- Ethyl 1H-1,2,3-triazole-5-carboxylate
- Poly-AminoEthylFormate
- CARBOXYLIC ACID