1-AMINO-1-CYCLOPENTANECARBOXAMIDE
1-AMINO-1-CYCLOPENTANECARBOXAMIDE Basic information
- Product Name:
- 1-AMINO-1-CYCLOPENTANECARBOXAMIDE
- Synonyms:
-
- 1-AMINO-1-CYCLOPENTANECARBOXAMIDE
- 1-CARBOXAMIDOCYCLOPENTYLAMINE
- Carboxamidocyclopentylamine
- 1-amino-1-cyclopentancarboxamide
- 1-AMino-cyclopentyl aMide
- 1-AMinocyclopentane-1-carboxaMide
- 1-AMINOCYCLOPENTANE CARBOXAMIDE
- Cyclopentanecarboxamide, 1-amino-
- CAS:
- 17193-28-1
- MF:
- C6H12N2O
- MW:
- 128.17
- EINECS:
- 422-950-9
- Product Categories:
-
- API intermediates
- Mol File:
- 17193-28-1.mol
1-AMINO-1-CYCLOPENTANECARBOXAMIDE Chemical Properties
- Melting point:
- 95-96℃ (acetone pentane )
- Boiling point:
- 301.5±21.0 °C(Predicted)
- Density
- 1.132±0.06 g/cm3 (20 ºC 760 Torr)
- storage temp.
- Keep in dark place,Sealed in dry,Room Temperature
- pka
- 16.14±0.20(Predicted)
- Appearance
- Light yellow to brown Solid
- CAS DataBase Reference
- 17193-28-1(CAS DataBase Reference)
Safety Information
- Hazard Codes
- T
- Risk Statements
- 22-41-48/25
- Safety Statements
- 22-26-36/39-45
- WGK Germany
- 3
1-AMINO-1-CYCLOPENTANECARBOXAMIDE Usage And Synthesis
Uses
1-Amino-1-cyclopentanecarboxamide is a useful synthesis intermediate. An amino-cyclopentanecarboxamide derivative with pharmacological and tumor inhibiting activity.
Synthesis
49830-37-7
17193-28-1
General procedure for the synthesis of cis-2-amino-1-cyclopentanecarboxamide from 1-aminocyclopentanecarbonitrile: 1. Preparation of 3-(1-carbamoyl-1-cyclopentylamino)-1-propanesulfonic acid (Compound OT): NaCN (15.34 g, 0.31 mol) and NH4Cl (19.75 g, 0.37 mol) were added to a 250 mL single-necked flask containing 30% NH4OH (120 mL) under vigorous stirring. The corresponding ketones were added dropwise over 20 min at room temperature. The mixture was stirred at room temperature for 3 days and then extracted with dichloromethane (50 mL). The organic layer was separated and dried with anhydrous sodium sulfate for 2 hours. The sodium sulfate was removed by filtration and the solvent was removed under reduced pressure to give crude aminonitrile. Distillation under reduced pressure gave the target product as a colorless oil (14.03 g, 127 mmol, 51% yield). 2. Aminonitrile (41 mmol) was dissolved in 30 mL of CH2Cl2 and added dropwise to 10 g of concentrated sulfuric acid stirred in an ice-water bath, maintaining the internal temperature at 15 °C. The mixture was then stirred in an ice-water bath. The ice bath was then removed and the mixture was heated to 40 °C for 1 hour. The mixture was cooled in the ice water bath and poured into 200 g of crushed ice. The mixture was adjusted to pH 7-8 with 28% NH3 aqueous solution and extracted with EtOAc (3 x 100 mL). The extract was collected, dried (MgSO4) and evaporated to dryness. The crude solid was recrystallized in EtOAc/Hex to give the target product as a white solid (1.36 g, 10.6 mmol, 27% yield). 3. A solution of 1,3-propanesulfonolactone (1 M, 6.30 mL) in toluene was added to a solution of 2-amino-2-methylpropanamide (0.4350 g, 4.26 mmol) in MTBK (7 mL) and ethanol (0.5 mL). The mixture was heated to reflux for 4 hours and then cooled to room temperature. The solid was collected by filtration and rinsed with acetone (2 x 5 mL). The solid was dried in a vacuum oven at 60 °C for 18 h (0.74 g). The solid was recrystallized in ethanol (5 mL) and water (5 mL). After drying, cis-2-amino-1-cyclopentanecarboxamide was obtained as a fine white solid (0.39 g, 2.80 mmol, 45% yield).
References
[1] Patent: US2006/223855, 2006, A1. Location in patent: Page/Page column 157
1-AMINO-1-CYCLOPENTANECARBOXAMIDESupplier
- Tel
- 821-50328103-801 18930552037
- 3bsc@sina.com
- Tel
- 021-021-58432009 400-005-6266
- sales8178@energy-chemical.com
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
- Tel
- 0512-68780025 18962125825
- sales@ryanchem.com
- Tel
- info@syntechem.com
1-AMINO-1-CYCLOPENTANECARBOXAMIDE(17193-28-1)Related Product Information
- 4'-[(2-Butyl-4-oxo-1,3-diazaspiro[4.4]non-1-en-3-yl)methyl]-(1,1'-biphenyl)-2-carbonitrile
- Irbesartan Impurity 4
- 2-Butyl-4-spirocyclopentane-2-imidazolin-5-one hydrochloride
- [1,1'-Biphenyl]-2-carboxamide, 4'-[(2-butyl-4-oxo-1,3-diazaspiro[4.4]non-1-en-3-yl)methyl]-
- 1-AMINO-1-CYCLOPENTANECARBOXAMIDE
- Irbesartan
- CIS-2-AMINO-1-CYCLOPENTANECARBOXAMIDE
- 6,9-Diazaspiro[4.5]decane-7,10-dione,8-methyl-(9CI)
- 1,3-DIAZA-SPIRO[4.4]NONANE-2,4-DIONE
- 2-N-BUTYL-1,3-DIAZA-SPIRO[4,4]NON-1-EN-4-ONE HYDROCHLORIDE
- Spiriprostil
- N-{6-[(cyclopentylcarbonyl)amino]hexyl}cyclopentanecarboxamide
- 1-(N-BENZYL-2-(4-PHENYL-2-THIOXOIMIDAZOLIDIN-1-YL)ACETAMIDO)-N-(4-MORPHOLINOPHENYL)CYCLOPENTANECARBOXAMIDE
- 1-(N-BENZYL-2-(4-PHENYL-2-THIOXOIMIDAZOLIDIN-1-YL)ACETAMIDO)-N-(2,4-DIMETHOXYPHENYL)CYCLOPENTANECARBOXAMIDE
- TOSLAB 802913
- N-(1-(BENZHYDRYLCARBAMOYL)CYCLOPENTYL)PICOLINAMIDE
- 3A,6A-DIMETHYL-2-NITROHEXAHYDRO-1,4-METHANOCYCLOPENTA[C]PYRROLE-1(2H)-CARBOXAMIDE
- N-(4-(DIMETHYLAMINO)PHENYL)-1-(N-(2-FLUOROBENZYL)-2-(4-PHENYL-2-THIOXOIMIDAZOLIDIN-1-YL)ACETAMIDO)CYCLOPENTANECARBOXAMIDE