3-IODOPHTHALIC ACID
3-IODOPHTHALIC ACID Basic information
- Product Name:
- 3-IODOPHTHALIC ACID
- Synonyms:
-
- 3-IODOPHTHALIC ACID
- 3-Iodobenzene-1,2-dicarboxylic acid
- 3-Iodo-1,2-benzenedicarboxylic acid
- NSC 42518
- 3-Iodophthaltc acid
- 3-Lodophthalic acid
- 3-Iodophthalic acid 95%
- 1,2-Benzenedicarboxylic acid, 3-iodo-
- CAS:
- 6937-34-4
- MF:
- C8H5IO4
- MW:
- 292.03
- EINECS:
- 638-780-5
- Product Categories:
-
- Carboxylic Acids
- Pyrazines, Pyrimidines & Pyridazines
- Carboxylic Acids
- Phenyls & Phenyl-Het
- Pyrazines, Pyrimidines & Pyridazines
- Mol File:
- 6937-34-4.mol
3-IODOPHTHALIC ACID Chemical Properties
- Melting point:
- 200-204 °C
- Boiling point:
- 426.3±40.0 °C(Predicted)
- Density
- 2.138±0.06 g/cm3(Predicted)
- storage temp.
- Keep in dark place,Sealed in dry,Room Temperature
- pka
- 1.91±0.10(Predicted)
- Appearance
- Off-white to yellow Solid
Safety Information
- Hazard Codes
- Xi
- Hazard Note
- Irritant
- HS Code
- 2917399590
3-IODOPHTHALIC ACID Usage And Synthesis
Uses
The study of the interaction of uranyl ion with 3-Iodophthalic Acid by Calvin-Bjerrum titration technique.
Synthesis
5434-20-8
6937-34-4
3-Aminophthalic acid (5.00 g, 27.6 mmol) was used as raw material and dissolved in 8.4 mol/L hydrochloric acid (60 mL). Under the cooling condition of an ice bath, aqueous sodium nitrate solution (10 mL containing 2.0 g, 29 mmol) was slowly added dropwise and the reaction was kept for 20 minutes. Subsequently, stirring was continued at the same temperature for 3 hours. Next, an aqueous solution (10 mL) of potassium iodide (6.9 g, 41 mmol) and urea (291 mg) pre-dissolved in potassium iodide (6.9 g, 41 mmol) and urea (291 mg) was added dropwise to the reaction mixture and transferred to room temperature and stirred for 20 hours. Upon completion of the reaction, the mixture was quenched by adding 10% aqueous sodium thiosulfate solution to the mixture and the product was extracted with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous sodium sulfate. The solvent was removed by concentration under reduced pressure and the residue was washed with chloroform to give the final 3-iodophthalic acid (5.0 g, 62% yield).
References
[1] Patent: EP2108642, 2009, A1. Location in patent: Page/Page column 110
[2] Journal fuer Praktische Chemie (Leipzig), 1896, vol. <2> 53, p. 383
[3] Journal of the Chemical Society, 1914, vol. 105, p. 2480
[4] Bioorganic and Medicinal Chemistry, 2014, vol. 22, # 22, p. 6366 - 6379
3-IODOPHTHALIC ACIDSupplier
- Tel
- 18210857532; 18210857532
- jkinfo@jkchemical.com
- Tel
- 021-021-58432009 400-005-6266
- sales8178@energy-chemical.com
- Tel
- 021-54306202 13764082696
- info@hanhongsci.com
- Tel
- 800-810-5118
- cnchemical@thermofisher.com
- Tel
- 4009209199
- sales@9dingchem.com
3-IODOPHTHALIC ACID(6937-34-4)Related Product Information
- 3-(HYDROXYMETHYL)-BENZOIC ACID
- 3-AMINOPHTHALIC ACID HYDROCHLORIDE
- 1-Methyl-3-nitrophthalate
- 3-Oxocyclopentanecarboxylic acid
- 3-HYDROXYPHTHALIC ANHYDRIDE
- 4-Hydroxyphthalic acid
- 3-AMINOPHTHALIC ACID
- 3-BOC-AMINO-2,6-DIOXOPIPERIDINE
- Luminol
- 3-Iodobenzoic acid
- 1-Iodo-2,3-dimethylbenzene
- 2-Iodobenzoic acid
- 3-IODOPHTHALIC ACID
- 3-Iodo-2-methylbenzoic acid
- 1-HYDROXY-1,3-DIOXO-1,3-DIHYDRO-1L5-BENZO[D][1,2]IODOXOLE-4-CARBOXYLIC ACID
- DIMETHYL 3-IODOPHTHALATE
- 4-Iodophthalic acid dimethyl ester
- 4-iodophthalic acid