Benzyl chloroformate Chemical Properties

Melting point:

-20 °C

Boiling point:

103 °C20 mm Hg(lit.)

Density 

1.212 g/mL at 20 °C

vapor density 

1 (vs air)

vapor pressure 

1.39 psi ( 20 °C)

refractive index 

n20/D 1.519(lit.)

Flash point:

197 °F

storage temp. 

Store at +2°C to +8°C.

solubility 

Miscible with ether, acetone and benzene.

form 

Solution

color 

slightly yellow to slightly pink

Odor

Irritating; sharp, penetrating.

Water Solubility 

decomposes

Sensitive 

Moisture Sensitive

Merck 

14,1801

Exposure limits

ACGIH: TWA 1 ppm
OSHA: TWA 1 ppm(5 mg/m3)
NIOSH: IDLH 10 ppm; Ceiling 1 ppm(5 mg/m3)

Stability:

Stable. Incompatible with water, oxidizing agents. Combustible.

CAS DataBase Reference

501-53-1(CAS DataBase Reference)

NIST Chemistry Reference

Benzyl chloroformate(501-53-1)

EPA Substance Registry System

Carbonochloridic acid, phenylmethyl ester (501-53-1)

Safety Information

Hazard Codes 

T,C,N,F

Risk Statements 

45-20-34-48/22-50/53-67-65-63-48/20-11-43-37-23

Safety Statements 

53-26-36/37/39-45-60-61-62-46-36/37

RIDADR 

UN 2924 3/PG 2

WGK Germany 

3

RTECS 

LQ5860000

F 

19

Autoignition Temperature

590 °C

TSCA 

Yes

HS Code 

2915 90 70

HazardClass 

8

PackingGroup 

I

Hazardous Substances Data

501-53-1(Hazardous Substances Data)

Toxicity

LD50 orally in Rabbit: 3000 mg/kg

MSDS

• Language:English Provider:ACROS
• Language:English Provider:SigmaAldrich
• Language:English Provider:ALFA

Benzyl chloroformate Usage And Synthesis

Description

Benzyl chloroformate, also known as benzyl chlorocarbonate or Z-chloride, is the benzyl ester of chloroformic acid. It can be also described as the chloride of the benzyloxycarbonyl (Cbz or Z) group. In its pure form it is a water-sensitive oily colorless liquid, although impure samples usually appear yellow. It possesses a characteristic pungent odor and degrades in contact with water.
The compound was first prepared by Leonidas Zervas in the early 1930s who used it for the introduction of the benzyloxycarbonyl protecting group, which became the basis of the Bergmann-Zervas carboxybenzyl method of peptide synthesis he developed with Max Bergmann. This was the first successful method of controlled peptide chemical synthesis and for twenty years it was the dominant procedure used worldwide until the 1950s. To this day, benzyl chloroformate is often used for amine group protection.

Chemical Properties

colorless or light yellow oily liquid with rancid odor. soluble in ether, acetone, benzene and other organic solvents. It is used to protect amino groups in peptide synthesis.

Uses

Benzyl chloroformate is widely used as a reactive chemical intermediate in plastic, pharmaceutical, agricultural and organic chemicals. It is useful for the introduction of carboxybenzyl (cbz) protecting group for amines such as aniline in organic synthesis. It is also involved in the synthesis of 1,2,4-oxadiazoles.

Preparation

Benzyl chloroformate is prepared in the lab by treating benzyl alcohol with phosgene:
PhCH2OH + COCl2→ PhCH2OC(O)Cl + HCl
Phosgene is used in excess to minimise the production of the carbonate (PhCH2O)2C=O.
The use of phosgene gas in the lab preparation carries a very large health hazard, and has been implicated in the chronic pulmonary disease of pioneers in the usage of the compound such as Zervas.

Application

Benzyl chloroformate is used as a reagent in peptide synthesis to protect the amine functionality as the benzyloxycarbonyl (Cbz or Z) derivative.
Cbz-protected anilines were prepared directly from aromatic carboxylic acids, sodium azide and Cbz-Cl.
Protecting reagent in peptide synthesis.

General Description

Benzyl chloroformate appears as a colorless liquid with an acrid odor. Vapors irritate eyes and mucous membranes. Corrosive to metals and tissue. Long-term inhalation of low concentrations or short-term inhalation of high concentrations can result in adverse health effects.

Air & Water Reactions

Decomposes in moist air. Decomposes slowly in water to give corrosive hydrochloric acid and organic acids.

Reactivity Profile

Benzyl chloroformate decomposes slowly in water forming benzyl alcohol, HCl, and CO2. Gives off HCl fumes in moist air. Reacts with bases, both organic and inorganic. Attacks many metals especially in humid atmosphere [Handling Chemicals Safely 1980. p. 476]. Catalytic impurity incidents involving the iron catalyzed decomposition of benzoyl chloroformate have caused several explosions. The iron presumably comes from corrosion of steel storage tanks [Loss Prev. Bull., 1975, (003), 2]. May react vigorously or explosively if mixed with diisopropyl ether or other ethers in the presence of trace amounts of metal salts [J. Haz. Mat., 1981, 4, 291].

Hazard

Highly toxic, emits very toxic phosgene fumes at 100C. Irritant to eyes.

Health Hazard

Inhalation causes mucous membrane irritation. Eyes are irritated by excessive exposure to vapor. Liquid causes severe irritation of eyes and irritates skin. Ingestion causes irritation of mouth and stomach.

Safety Profile

Poison by ingestion andinhalation routes. A powerful corrosive irritant. Thermallyunstable. Will react with water or steam to produce toxic and corrosive fumes and heat. Iron salts catalyze theexplosive decomposition of the ester. When heated todecomp.

Synthesis

Benzyl chloroformate (CbzCl) was synthesized by combining the carbonylation of benzyl alcohol with carbon monoxide and sulfur (or carbonyl sulfide) in the presence of DBU, with the chlorination using sulfuryl chloride.
https://doi.org/10.1016/S0040-4039(02)01834-8

storage

Store at temperature at or below –15°C (5°F) in a dry, well‐ventilated location. All equipment and storage vessels must be constructed of Teflon or glass‐lined steel. Keep container tightly closed. Protect from sunlight and avoid any contact with iron.Product is stable when stored properly at recommended storage temperature. Storage in recommended temperatures and conditions will ensure product quality for minimum 12 months before retesting may be needed to determine assay. Storage in conditions between –15°C (5°F) and –5°C (23°F) may require retesting after 6 months to determine assay. Storage above 0°C (32°F) not recommended.

Purification Methods

The commercial material is usually better than 95% pure and may contain some toluene, benzyl alcohol, benzyl chloride and HCl. After long storage (e.g. two years at 4o, Greenstein and Winitz [The Chemistry of the Amino Acids Vol 2 p. 890, J Wiley and Sons NY, 1961] recommended that the liquid should be flushed with a stream of dry air, filtered and stored over sodium sulfate to remove CO2 and HCl which are formed by decomposition. It may further be distilled from an oil bath at a temperature below 85o because Thiel and Dent [Annalen 301 257 1898] stated that benzyloxycarbonyl chloride decarboxylates to benzyl chloride slowly at 100o and vigorously at 155o. Redistillation at higher vacuum below 85o yields material which shows no other peaks than those of benzyloxycarbonyl chloride by NMR spectroscopy. [Beilstein 6 IV 2278.] LACHRYMATORY and TOXIC.

Benzyl chloroformate(501-53-1)Related Product Information

• Choline chloride
• Benzyl formate
• Citric acid
• Benzyl alcohol
• Benzyl benzoate
• Folic acid
• Sodium chloride
• Calcium chloride
• Ethyl 2-(Chlorosulfonyl)acetate
• Polyvinyl chloride
• Ammonium chloride
• Sulfuryl chloride
• Ferric chloride
• Carbobenzoxyhydrazide
• Hyaluronic acid
• Potassium chloride
• Phenyl chloroformate
• Ascoric Acid