Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
Home > Cylopropylmethyl chloride > Cylopropylmethyl chloride(5911-08-0)

Cylopropylmethyl chloride(5911-08-0)

Supplier Product Identification Physical and Chemical Properties First Aid Measures Handling and Storage Hazards Identification Exposure Controls/Personal Protection Fire Fighting Measures Accidental Release Measures Stability and Reactivity Transport Information
More
Less

Product Identification

Product Name

Cylopropylmethyl chloride

Synonyms

a-(Chloromethyl)cyclopropane
Cyclopropylmethyl chloride

CAS

5911-08-0

Formula

C4H7Cl

Molecular Weight

90.004999999999995

EINECS

227-632-1

Beilstein/Gmelin

635697

Beilstein Reference

4-05-00-00013

EC Class

highly flammable

More
Less

Physical and Chemical Properties

Appearance

Colorless liquid.

Solubility in water

Insoluble

Melting Point

-91

Boiling Point

87

Vapor Pressure

70 (25 C)

Density

0.98 g/cm3 (25C)

Partition Coefficient

1.87

Heat Of Vaporization

31.4 kJ/mol

Refractive Index

1.4350 (20 C)

More
Less

First Aid Measures

Ingestion

If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.

Inhalation

Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin

Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Remove contaminated clothing and shoes.

Eyes

Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.

More
Less

Handling and Storage

Storage

Keep away from heat, sparks, and flame. Flammables-area.

Handling

Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.

More
Less

Hazards Identification

Inhalation

Vapors may cause dizziness or suffocation. May cause irritation or burns.

Skin

May cause irritation or burns.

Eyes

See Skin.

Hazards

Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers.

EC Risk Phrase

R 11 22 36/37/38

EC Safety Phrase

S 16 23 26 36/37/39

UN (DOT)

1993

More
Less

Exposure Controls/Personal Protection

Personal Protection

Eyes: Wear chemical goggles. Wear safety glasses and chemical goggles if splashing is possible. Skin: Wear appropriate protective gloves and clothing to prevent skin exposure. Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators

A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

Exposure Effects

The toxological properties of this substance have not been fully investigated.

More
Less

Fire Fighting Measures

Flash Point

-2

Fire Fighting

Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extinguishing media: Use agent most appropriate to extinguish fire.

Fire Potential

HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames.

More
Less

Accidental Release Measures

Small spills/leaks

Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, using the appropriate protective equipment.

More
Less

Stability and Reactivity

Disposal Code

3

Stability

Stable under normal temperatures and pressures.

Incompatibilities

Strong oxidizing agents - strong bases.

Decomposition

Hydrogen chloride, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.

Combustion Products

Fire may produce irritating, corrosive and/or toxic gases.

More
Less

Transport Information

UN Number

1993

Hazard Class

3

Packing Group

I; II; III

HS Code

2903 59 90

More
Less

ContactMore

GT Chemical & Technology (changzhou) Co.,Ltd
Tel
0519-86889226
Fax
18015049226
WebSite
https://www.chemicalbook.com/ShowSupplierProductsList944855/0.htm
Watson Chemistry (Changzhou) Co.,Ltd.
Tel
0519-86627600
WebSite
http://www.eastfine.net/
J & K SCIENTIFIC LTD.
Tel
010-82848833
Fax
86-10-82849933
WebSite
http://www.jkchemical.com
Meryer (Shanghai) Chemical Technology Co., Ltd.
Tel
021-61259108
Fax
86-21-61259102
WebSite
https://www.meryer.com/cn/index/
Alfa Aesar
Tel
400-6106006
Fax
021-67582001/03/05
WebSite
http://chemicals.thermofisher.cn